Dake Bench Presses, C-Frame
- Adjustable return stroke, activated by proximity switch, permits accurate control of ram movement.
- Light-sensitive thumb pads must be engaged simultaneously before ram will move and cannot be mechanicallly by-passed.
- Hydraulic cylinders are manufactured to withstand 3,000 psi, but are used at less than 2,000 psi to prolong service life.
- Remote pressure adjustment easily sets maximum pressure desired.
- Run-jog selector allows fast, easy job set-up.
Standard Equipment:
- For each press ordered, select the bolster, nose piece, and desired voltage that meet your needs.
- Nose pieces available. Select one. 1. Threaded nose piece. 2. Flanged nose piece.
- Bolsters can easily be removed and replaced for different jobs.
- Select one for each press ordered.
- Additional bolsters are available as optional equipment. 1. Plain bolster 2. Bolster with U-slot 3. Bolster with bored hole.
- Voltages available. Select one. 1. 208 volts, 3 phase 2. 230 volts, 3 phase 3. 460 volts, 3 phase 4. 575 volts, 3 phase.
Specifications:
| model | 28-604 | 28-608 | 28-612 |
| capacity (tons) | 4 | 8 | 12 |
| horsepower | 1 | 2 | 5 |
| rpm | 1,800 | 1,800 | 1,800 |
| ram speed- advance | 510 | 481 | 511 |
| ram speed- press | 62 | 39 | 62 |
| ram speed- return | 475 | 447 | 474 |
| ram thread dimensions | 1"-14x1-1/... | 1-1/2"-12x... | 1-7/8-12x1-3/4 |
| A throat (inches) | 7-1/2 | 7-1/2 | 10-1/2 |
| B table slot width (inches) | 2-1/2 | 2-1/2 | 7 |
| C ram travel (inches) | 12 | 12 | 12 |
| D maximum ram to table (inches) | 12-1/2 | 12-1/2 | 14-1/2 |
| E table to base (inches) | 10 | 12 | |
| FxG table (inches) | 18x11-1/2 | 18x11-1/2 | 23x19 |
| HxI base (inches) | 31x19-3/4 | 36x20-1/2 | 47-1/2x24-3/4 |
| J height (inches) | 49-1/4 | 50 | 58-5/8 |
| weight (lbs) | 1,229 | 1,355 | 2,460 |
For more info, visit www.p65warnings.ca.gov.
