| Head Tilts 90º Left & Right And Swivels 360º
Hardened 4 M.T. Spindle
This heavy duty, power feed geared head direct drive drill press is now available in an economical package, capable of handling a wide range or your drilling and hole finishing operations.
Features:
- Spindle power down feed by 3 step feeds: 0.01mm - 0.18mm - 0.26mm per/r.p.m.
- Coolant system.
- Spindle is equipped with four heavy duty taper roller bearings.
- Forward and reverse switch.
- Head rotates 360º and tilts 90º left and 30º right.
- Elevator head stock moved by rack.
- Massive 3" diameter quill provides rigidity during operations.
- Gear drive operating in oil bath provides maximum efficiency smooth, quiet operation & long life.
| Specifications: |
| Drilling capacity in cast iron |
2" |
| Drilling capacity in mild steel |
1.28" |
| Swing |
20.8" |
| Max. distance spindle nose to table |
30.6" |
| Max. distance spindle nose to base |
54.6" |
| Spindle travel |
5.5" |
| 3 step power down feed |
0.12-0.18-0.25mm per/rev |
| Quill diamter -for multi-spindle attachment |
| Column diameter |
4.5" |
| No. of spindle spds. |
60-3000 rpm's |
| Surface of table |
21-1/4" x 18-1/2" |
| T-slot size |
5/8" |
| Center distance between T-slot |
6-1/2" |
| Overall height |
90.5" |
| Cooling pump |
1/8 HP |
| Motor (2 speed) |
1-1/2 HP, 3 Phase |
| Net weight |
660 lbs. |
|
|
