Clausing ATLAS CNC Vertical Mills w/ACU-RITE Mill Power Control
Overview
- Manual Operation with DRO
- Semi-Automatic Operation
- X and Y Axis CNC Operation
Features:
- Meehanite Castings for superior rigidity
- Infinitely Variable Spindle Speeds (60-4300 rpm)
- Hardened & Ground Ways
- Column & Knee Way Covers
- Ground T-slots to provide reference edge for positioning workpiece
- Hardened & Ground Table Surface
- Hardened & Ground Spindle
- Chromed & Ground Quill
- Ground Ball Screws & Chromed Motor Shaft
- ABEC 7/CP4 Spindle Bearings
- Coolant System w/Pump & Switch
- Chromed Cross Feed Screw Covers and One-piece Wiper
- Flexible Segmented Coolant Nozzle
- Articulating Head for Compound Angles
- Worm gear angular positioning of head in two directions
- Handwheel fine quill feed
- Lever-operated manual rapid quill movement
- Adjustable automatic feed disengagement for quill feed in both directions
- Reversing switch for clockwise or counter clockwise operation
- Spindle Brake (Hand operated)
- One-shot lubrication
- Mini Electrical Box for Coolant and Mains
- Tool Kit, Test and Accuracy Chart
- Operations Manual/Parts List
Optional Accessories:
- Chip Tray
- Full Electrics*
- Slotting Attachment
- Air PWR Drawbar #8 & #30*
- Air PWR Drawbar #40*
- Electric Drawbar*
- 52 Piece Clamping Kit
- Milling Chuck kit W/7 Collets
- Horizontal Milling Attachment
- AC Rapid Vertical Drive (4VSQ)*
- 4" Riser Block (2VS)
- 6" Riser Block (2VS)
- 8" Riser Block (All Models)
* Factory Installed only
Specifications:
| Models | 2VSCNC | 3VSCNC | 4VSQCNC |
| Table & Ways | |||
| Table Size | 9" x 49" | 10" x 54" | 10" x 54" |
| No. of T-Slots | 3 | 3 | 3 |
| T-Slot Width | .63" (16mm) | .63" (16mm) | .63" (16mm) |
| T-Slot Center Distance | 2.48" (63mm) | 2.48" (63mm) | 2.48" (63mm) |
| Table Ways | Dovetail | Dovetail | Dovetail |
| Knee Ways | Dovetail | Square | Square |
| Column Ways | Dovetail | Dovetail | Square |
| Travels | |||
| X Longitudinal | 30" (762mm) | 33" (838mm) | 33" (838mm) |
| Y Cross | 11.5" (292mm) | 15.5" (394mm) | 16" (406mm) |
| Knee | 16" (406mm) | 17.7" (450mm) | 17.7" (450mm) |
| Ram | 18.5" (470mm) | 20.5" (520mm) | 26.75" (680mm) |
| Motors & Spindle | |||
| Motor HP Variable | 3 (2.2Kw) | 3 (2.2Kw) | 5 (3.7Kw) |
| Variable Spindle Speed RPM | |||
| Low Range | 60-500 | 60-500 | 60-500 |
| High Range | 550-4300 | 550-4300 | 550-4300 |
| Main Spindle Taper | R-8 or ISO-30 | R-8 or ISO-30 | ISO-40 |
| Spindle Travel | 5" (127mm) | 5" (127mm) | 5" (127mm) |
| Quill Feed/Spindle Rev. | 0015/.003/.006in/rev. (.004/.008/.015mm/rev | ||
| Quill Diameter | 3.38" (127mm) | 3.38" (127mm) | 4.13" (105mm) |
| Construction | |||
| Column Turret Diameter | 14.96" (380mm) | 16.33" (415mm) | 16.33" (415mm) |
| Knee Width | 11.81" (300mm) | 14.17" (360mm) | 14.96" (380mm) |
| Column Bearing Length | 16.83" (427mm) | 18.11" (460mm) | 19.7" (500mm) |
| Saddle/Table Bearing Length | 19.88" (305mm) | 20.47" (520mm) | 20.47" (520mm) |
| Ram/Turret Bearing Length | 17.51" (445mm) | 17.51" (445mm) | 20.67" (525mm) |
| Ram Length | 32.75" (832mm) | 32.75" (832mm) | 38.63" (980mm) |
| Table Load | 700 lbs. (316kg) | 880 lbs. (400kg) | 990 lbs. (450kg) |
| Net Weight | 2250 lbs. (1020kg) | 2970 lbs. (1348kg) | 3630 lbs. (1647kg) |
For more info, visit www.p65warnings.ca.gov.
