Hermann Schmidt Precision Grinding Vises
These vises consists of a one-piece base and stationary jaw, and a moveable jaw with quick acting, ratchet screw. The screw pulls the moveable jaw forward and down at approximately 45º. This eliminates lifting of the jaw when clamping small or thin work pieces.
Two counter bored holes are provided in the stationary jaw for mounting a parallel or “V” shaped pad. The base also has four counter bored holes allowing the vise to be mounted.
The moveable jaw is individually fitted for accuracy.
- Flat, parallel & square within .0002″
- Deep frozen for stability
Item No. | VO-1-1/2A | VO-1-1/2S | V0-4 | V0-4S |
Length | 2-7/8" | 2-7/8" | 6-1/2" | 6-1/2" |
Width | 1-1/2" | 1-1/4" | 3" | 3" |
Height | 1-1/4" | 1-1/2" | 2-3/8" | 2-3/8" |
Depth of Jaw | 5/8" | 5/8" | 1-1/4" | 1-1/4" |
Hardness | 60-62 RC | 58-60 RC | 60-62 RC | 58-60 RC |
For more info, visit www.p65warnings.ca.gov.