Interstate Triple Bearing Live Centers
Features
- With 60º Included angle
- Dust, chip and oil-proof mechanism with labyrinth packing and special oil seal
- The seal has a running in period of approximately 250 hours, during which time heating may be noticed - this is not detrimental to the centerr and will not occur when the seal has been run-in
- The center is fitted with preloaded taper roller bearings.
- These are set in the factory, but may need resetting after initial running-in (Approximately 250 Hrs)
- The bearings should be set so that slight resistance is felt when revolving by hand
- Test check by running under no load condition to be sure excessive heating dose not occur.
For more info, visit www.p65warnings.ca.gov.
