Kent USA HW-30 Series Precision Lathes
Features:
- 15 HP spindle motor, 12-speeds
- 4.5" (115mm) spindle through hole
- Solid one piece full length casting base and bedways for maximum rigidity
- Spindle jog button control
- One-shot lubrication for apron, multi-position adjustable feed position stops
- Dual inch/metric calibrated tailstock
- Dual inch/metric dials
Standard Accessories:
- 3-Jaw chuck (15")
- Steady rest
- Follow rest
- Work light
- Thread chasing dial
- 4 position tool post
- Coolant system with full-length splash guard
- 4 position carriage stop
Optional Accessories:
- DRO System 80" (2-axis, x=0.0001"/z=0.0005" res)* ($ 3,580.00)
- DRO System 120" (2-axis, x=0.0001"/z=0.0005" res)* ($ 4,650.00)
- DRO System 160" (2-axis, x=0.0001"/z=0.0005" res)* ($ 5,650.00)
- DRO installation charge ($ 550.00)
- Aloris DA #5-SET (Tool Post and 6 holders) ($ 2,450.00)
- Royal spindle type live center (M.T. #5) ($ 1,050.00)
- BTC 3-Jaw chuck w/back plate (Zero-set, 15" D1-11) ($ 3,500.00)
- 4-Jaw independent Chuck (16" D1-11) ($ 1,995.00)
- Adaptor plate for mounting chucks at back of spindle ($ 1,850.00)
- Face plate (20" D1-11) ($ 1,250.00)
- Taper turning attachment* ($ 2,350.00)
- Micrometer carriage stop ($ 395.00)
- Rustlick coolant (1 gallon, mixes 1:30) ($ 50.00)
* Installed options may require non-refundable deposit with order
Specifications:
| Model | HW-3080 | HW-30120 | HW-30160 | |
| CAPACITY | Swing over bed ways | 30" (760mm) | ||
| Swing over cross slide | 21.3" (540mm) | |||
| Swing over gap | 38.9" (990mm) | |||
| Gap length (w/ face plate) | 11.8" (300mm) | |||
| Bed width | 15.75" (400mm) | |||
| Distance between centers | 80" (2000mm) | 130" (3300mm) | 169" (4300mm) | |
| HEADSTOCK | Spindle hole | 4.5" (115mm) | ||
| Spindle nose camlock | D1-11 | |||
| Spindle to sleeve taper | MT #7 | |||
| Spindle bore | 4.5" (115mm) | |||
| Spindle speed | 12 Steps, 10-1000 RPM (bore 115mm) | |||
| CARRIAGE | Cross slide travel | 14.75" (375mm) | ||
| Top slide (compound) travel | 8" (200mm) | |||
| FEED BOX | Thread capacity (inches) | 44, 2 - 56 TPI | ||
| Thread capacity (metric) | 39, 0.5 - 14 mm | |||
| Leadscrew Diameter | 1.5" | |||
| Leadscrew pitch | 4 TPI | |||
| Longitudinal feeds | 0.002 - 0.032 IPR | |||
| Cross feeds | 0.001 - 0.0094 IPR | |||
| TAILSTOCK | Quill diameter with tang | 3.3" (85mm) | ||
| Quill travel | 6.5" (165mm) | |||
| Quill taper | MT #5 | |||
| POWER | Main motor | 15 HP | ||
| Coolant pump motor | 1/8 HP | |||
| Control circuit voltage | 115 V | |||
| DIMENSION | Shipping dimension (L x W x H) | 137" x 41" x 52" | 186" x 41" x 52" | 219" x 41" x 52" |
| WEIGHT | Net weight (approx) | 7010 lbs. | 8663 lbs. | 11330 lbs. |
| Gross weight (approx) | 7340 lbs. | 8994 lbs. | 11772 lbs. | |
Power Requirement: 230 volts, 3-phase, 60 Hz, 50 Amp or
460 volts, 3-phase, 60 Hz, 25 Amp
* Please note: All pricing, features, and specifications are subject to change without prior notice. Pricing based FOB Tustin, California.
For more info, visit www.p65warnings.ca.gov.
