LeBLOND 20" Swing Lathe Variable Speed w/Electronic Control - RKL-1960V

Brand:   LeBLOND
SKU:
RKL-1960V
ID:
326071
Call for Pricing
Current Stock:

Call for Pricing

LeBLOND

LeBLOND 20" Swing Lathe Variable Speed w/Electronic Control - RKL-1960V

FEATURES:

HEAVY DUTY SPINDLE:
The headstock spindle is machined from forged alloy steel. It is hardened, ground and dynamically balanced. Large through hole with convenient D1-6 cam-lock mount. Special attention was given to lubrication channels providing a constant bath of oil to the supporting high grade two precision tapered roller and one precision ball bearing for long life.
VARIABLE SPEED SPINDLE WITH ELECTRONIC CONTROL:
Two headstock gear ranges that supply a high torque in low range (30 to 1250 RPM), Mid-range (125-450) and in high range (450 to 2200 RPM). The electronic control panel that is mounted above the headstock provides a RPM LED display, ON-OFF power indicator light, speed control knob, emergency stop push button and spindle jogging push button. The electronic infinitely variable speed is controlled by an AC inverter duty motor. A 1/4HP electric pump provides the headstock with forced pressure lubrication.
WIDE BED WITH ONE PIECE BASE:
One-piece machine floor base is made of solid cast iron. Wide bed design is made of Meehanite casting that is vibration stress relieved. Bed ways are induction hardened to HRC 50 and precision ground. Precision hand scraped bed is designed with a removable gap further expanding swing capabilities. The proven LeBlond 2V and flat solid bed structure provides rigidity that assures accuracy and maximum stability. Standard large volume removable chip tray makes for easy chip clean out and disposal.

Standard Equipment:

  • 7.5 hp Inverter Drive and Motor
  • Electrics: 480V/3PH/60HZ 
  • Coolant System with Pump and Reservoir
  • Chuck Guard with Spindle Safety Interlock
  • Removable Front Chip Pan
  • Lockable Main Disconnect Switch
  • Halogen Work Light
  • Leveling Pads
  • Operation Manual & Parts List
  • Tool Box & Tools
  • Steady Rest with Roller Jaws 
  • Follow Rest with Roller Jaws 
  • Telescopic Taper Attachment
  • 4-Way Quick Turn Tool Post
  • Face Plate (10″)
  • Safety Red Spindle Brake Pedal
  • Full Length Splash Guard
  • Dead Center (Qty 2)
  • Spindle Center Sleeve: MT7 X MT5 (Qty 1)
  Model RKL-1960V
CAPACITY Swing Over Bed 20"
Distance Between Centers 40"/ 60"
Swing Over Carriage 13.9"
Swing in Gap 27.5"
Gap Length 13.2″
Cross Slide Travel 10.7"
Bed Width 12"
 
HEADSTOCK Spindle Nose D1-6
Spindle Bore 3.149"
Taper Inside Spindle MT 7
Infinitely Selections Between Range (RPM): 30 – 2200 Three Ranges
 
THREADS Inch Threads (45) 2 to 72 TPI
Metric Threads (39) 0.2 to 14 MM
Modular Threads (18) 0.3 to 3.5
Diametral Threads (21) 8 to 44
 
FEEDS Longitudinal Feed 0.0015 to 0.04 IPR
Cross Feed 0.00075 to 0.02 IPR
Number of Feed Selections 45
 
TAILSTOCK Quill Diameter 2.3"
Quill Travel 5.0"
Quill Inside Taper MT 4
 
ELECTRICS Spindle Motor & Inverter 7.5 HP
Voltage 480V / 3PH/ 60Hz
Coolant Motor 1/8 HP
 
WEIGHT Approximate Net Weight (lbs) 4850
MEASUREMENTS Floor Space Requirement W x L 67″ x 93″ / 112″

Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

LeBLOND 20" Swing Lathe Variable Speed w/Electronic Control - RKL-1960V

LeBLOND 20" Swing Lathe Variable Speed w/Electronic Control - RKL-1960V

LeBLOND 20" Swing Lathe Variable Speed w/Electronic Control …