Rong Fu Heavy Duty Geared Head Drill Press with Power Down Feed - JFC-46SF
Brand: Rong Fu- SKU:
- JFC-46SF
- ID:
- 93071
$0.00
Rong Fu Heavy Duty Geared Head Drill Press with Power Down Feed - JFC-46SF
Head Tilts 90º Left & Right and Swivels 360º
Hardened 4 M.T. Spindle
- This heavy duty, power feed geared head direct drive drill press is now available in an economical package, capable of handling a wide range or your drilling and hole finishing operations.
Features:
- Spindle power down feed by 3 step feeds: 0.01mm - 0.18mm - 0.26mm per/r.p.m.
- Coolant system.
- Spindle is equipped with four heavy duty taper roller bearings.
- Forward and reverse switch.
- Head rotates 360º and tilts 90º left and 30º right.
- Elevator head stock moved by rack.
- Massive 3" diameter quill provides rigidity during operations.
- Gear drive operating in oil bath provides maximum efficiency smooth, quiet operation & long life.
Specifications:
| Drilling capacity in cast iron | 2" |
| Drilling capacity in mild steel | 1.28" |
| Swing | 20.8" |
| Max. distance spindle nose to table | 30.6" |
| Max. distance spindle nose to base | 54.6" |
| Spindle travel | 5.5" |
| 3 step power down feed | 0.12-0.18-0.25mm per/rev |
| Quill diamter -for multi-spindle attachment | |
| Column diameter | 4.5" |
| No. of spindle spds. | 60-3000 rpm's |
| Surface of table | 21-1/4" x 18-1/2" |
| T-slot size | 5/8" |
| Center distance between T-slot | 6-1/2" |
| Overall height | 90.5" |
| Cooling pump | 1/8 HP |
| Motor (2 speed) | 1-1/2 HP, 3 Phase |
| Net weight | 660 lbs. |
For more info, visit www.p65warnings.ca.gov.
