Roper Whitney Box and Pan Brake PX24

Brand:   Roper Whitney
ID:
93205
Call for Pricing
Current Stock:

Roper Whitney

Roper Whitney Box and Pan Brake PX24

Light duty bending brakes are for light forming requirements (up to 16 gauge mild steel). When used within their rated capacity, they will form a minimum 1/2" flange over their entire length.

  • Maximum Rated Capacity: 16 gauge mild steel

The PX24 Box and Pan Brakes adjustable back gauge are ideal for small, precise box and pan work (up to 3" deep). It will accommodate sheet metal up to 16 gauge. The PX24 will bend as much as a 135¡ angle in up to a 24-inch length. Standard fingers provided include one each 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6". Fingers are heat-treated die steel, precision ground. Set of fingers can be arranged to form 3/4: to 24" in 1/4" increments. Back gauge adjustment is from 0-24".

Adjustable friction brake lock stops upper bar dead-weight drop and permits precise positioning of upper bar to scribed line on work piece before final clamping. The pan brakes have optional special fingers to adapt them to inside mitered lip boxes, 9" long square tubes and radius bends up to 1". The floor mount stand shown must be ordered as a separate item.

Minimum 1/4" (PX24) reverse bends are possible with these light duty brakes by removing both the apron angle iron work support and apron filler plate and reducing the capacity by four gauges.


Extension Fingers (PX24 & PX36) for inside mitered lip boxes, minimum 2 1/2" square box.

Radius Fingers (PX24 & PX36) Available in widths of 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6" with radii of 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", and 1"

Open End Finger (PX24 & PX36) for forming square tubes up to 9" long, tapers from 3/4" to 1 1/2"

Reference No. PX24
A 34" / 86 cm
B 11" / 86 cm
C 28" / 71 cm
Bench Mount Stand 34" W x 30" H x 14" D

px24-dimensions.gif

Specifications No. PX24
Bending length 24" / 610 mm
Capacity mild steel, 1-Inch flange

bending bar and angle in place:
bending bar and angle removed:


16 ga. / 1.60 mm
20 ga. / 1.00 mm
Minimum reverse bend
(bar and angle removed)
1/4" / 6.35 mm
Maximum lift of beam 1" / 25 mm
Finger Widths IN.: 3/4, 1, 1-1/2, 1-3/4,
3, 4-1/2, and 6"

MM: 19, 25, 38, 44.5, 76,
114, and 152 mm
Maximum depth of box 3" / 76 mm
Back gauge adjustment 0 - 24" / 0 - 610 mm
Shipping Weight 270 lbs. / 125 kg
Radius Fingers (Optional) IN: 1/16, 1/8, 3/16, 1/4
5/16, 3/8, 7/16, 1/2, 3/4, and 1"

MM: 1.6, 3.17, 4.76, 6.35,
7.95, 9.5, 11, 12.7, 19, and 25.4 mm
Bench Stand (Optional) 34" long, 14" wide, 30" High
Bench Stand shipping weight 160 lbs. / 75 kg

 

Ordering Guide Item Number Shipping Weight
Pexto PX24 Box and Pan Brake 155070024 270 lbs. / 125 kg
Floor Stand PX24 239006006 160 lbs. / 75 kg
Extension Finger
PX24 Right
PX24 Left
251700107
251700108
3 lbs. / 1.5 kg
3 lbs. / 1.5kg
Open End Finger PX24 251700109 3 lbs. / 1.5 kg


Radius Fingers Specify radii and width desired Radii Available: 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", 1"
Widths Available: 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", 6"

***PX24 brake standard equipment includes one each 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2" and two 6" box fingers.
PX36 has same, except for four 6" box fingers.


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Roper Whitney Box and Pan Brake PX24

Roper Whitney Box and Pan Brake PX24

Roper Whitney Box and Pan Brake PX24