Simatec Simatherm Induction Heater
IH 025 VOLCANO
The portable induction heater for heating small ferritic workpieces
The Simatherm IH 025 VOLCANO marks the start of a new era in the field of portable induction heaters. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg. To do this, simply place the workpiece onto the VOLCANO's cone shaped heating surface.
Features:
- Portable, compact and very light (3.5 kg)
- A bearing weighing 5 kg can be heated to 110°C in under four minutes
- Silent in operation
- No support yoke required – simply place the workpiece on the device
- Predictive Temperature Control (PTC) for automatic temperature monitoring
- For workpieces weighing up to 10kg (22 lb.)
- For workpieces with a minimum inner diameter of 20mm (0.8 in) up to a maximum outer diameter of 160mm (6.3 in)
- Also included: 1 temperature probe, 1 pair of protective gloves, 1 carrying case
- Available for voltages of 100, 115 and 230V
About Simatherm Induction Heaters:
The best way to avoid unwanted stresses when assembling interference-fit parts is to heat the outer part just enough to produce a temporary clearance. Simatherm induction heaters allow this to be done precisely, evenly, quickly and efficiently. Other methods of heating are slower, less controlled and can cause more harm than good to bearings.
Advantages:
- Precise, even, quick heating
- There is no risk of damage (from excessive mechanical stress, open flames, dirty oil baths, excessively hot ovens and plates)
- Automatic demagnetization
- User friendly
- Increased operational safety
- Selectable power reduction for heating up smaller parts
Click to View More Information
Specifications:
| Type | IH 025 |
| Description | Induction heater for small workpieces |
| Designation | IH 025/230 V (Art. 110.1101) IH 025/115 V (Art. 110.1103) IH 025/100 V (Art. 110.1102) |
| Voltage | 220-240 V 110-120 V 100 V |
| Frequency | 50-60 Hz 50-60 Hz 50-60 Hz |
| max. Amperage | 6 A 10.5 A 10.5 A |
| Power | 1.5 kVA 1.15 kVA 1.0 kVA |
| Max. weight of rolling bearing | 10kg (22lb) |
| Bore diameter | from 20 mm (0.8in) inner diameter to 160mm (6.3in) outer diameter |
| Temperature range | 20-180°C (68-356°F) |
| Magnetic probe | Yes, type K |
| Accuracy (electronic) | ± 3 °C (37.4°F) |
| Range of time control | 0-10 minutes |
| Time setting in steps | 0.1 minutes |
| Maximum temperature (approx.) | 180 °C (356°F) |
| Variable power level | 5 levels: 20-40-60-80-100% |
| Automatic demagnetization | Yes |
| Residual magnetism | < 2A/0.4in |
| Coil diameter | - |
| Size of operating area (W x H) | - |
| Dimensions (L x W x H) | 340 x 250 x 64 mm (13.4" x 9.8" x 2.5") , over the cone 121mm (4.8in) |
| Overall weight | 3.5 kg (7.7 lbs.) |
| Number of standard yokes | - |
| Standard yokes | - |
| Core cross section | - |
| Movable yoke | - |
| Cooling fan | Yes |
For more info, visit www.p65warnings.ca.gov.
