Manual release chuck control variable holding. Provides a direct current supply. Input: 155 VAC, Output: 0-110 VDC
SMART-B Series
Automatic release chuck control. Full, Variable and Residual Holding. Smart controls are designed to be used with electromagnetic chucks, with an input of 115 VAC, output 0-110 VDC and wattage capacities between 0-500.
Touchpad control allows easy selection of full, residual, variable and release positions
Automatic release cycle assures workpiece release, while freeing machine operators from manual demagnetizing operations
SMART-D Series
Automatic Release Controls for Wall Mounting
Automatic release chuck control. Full, variable and residual holding.
SMART-E controls are designed for use with electropermanent chucks with an input of 230 VAC, output of 200 VDC. Wattage capacities between 2000-5000. Available with remote for full variable with automatic release. Optional pendant for uncompensated chucks. Two button with full and release.
** Available with either remote control or pendant switch. Must be determined at time of purchase. Specify which kind you would like in the Additional Comments/Order Instructions section when ordering.
TM - TURBOMILL Chuck Controller
TM-100
208/240 VAC output
12 ft. DC output cord
24" x 20" x 8" NEMA 12 enclosure
Meet NEC and CSA specifications
PLC interface capability
Operators pendant (remote) with 12 foot cord; full and release function modes
TM-100V
208/600 VAC input
Operators pendant (remote) with 12 foot cord; full, release and variable modes. The variable mode is very useful when setting up horizontal spindle machines, and helpful with chip removal.
On large machines with multiple chucks, the TM-100V has optional chuck selection that powers only the chuck you need to use.
WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.
