Wogaard Coolant Saver

Wogaard Coolant Saver

The Coolant Saver Kit

Application - Reclaim coolant from Chip bin and return to machine

Typical Usage:

• Soluble Coolant on machines with Conveyors
• Neat oil up to 12cs on Sliding head low rated pumps

Kit Contains:

• Coolant Saver Unit
• Vacuum (Filtered) with 3m 6mm PU Hose *can be increased as much as 10 metres
• 1metre - 12mm Hose Outlet
• Fittings - 1/2' & 3/4' T & Straight fitting Kit
• Full step by step Guide *Technical Support available
• 1 Year Warranty

Features:

Up to 50% Coolant Saving

• Reduce topping up

Swarf Value

• Improved price for swarf without coolant

Up to 90% saving in disposal

• Reduction in Disposal cost to remove coolant

Improved Housekeeping

• No coolant collecting outside the machine or leaking on the floor

Manpower Reduction

• No manual intervention to empty coolant in swarf bin as it is done automatically
• Only swarf will require emptying from the bin

Environment

• Not only recycling coolant but NO external power required or outside coolant leaks

Specifications:

Click to View Instruction Manual

Vacuum Heads:

Standard Top Mounted Vacuum Head - 144-2000

• Supplied with Coolant Saver Kit (Part No. 144-1000)

Specifications:

• Material - Stainless Steel
• Diameter - 62.5mm (2.5")
• Filter - Double filter plates/Metal - Micro Mesh
• Top Mounted connector to 6mm Hose

Standard Top Mounted Vacuum Head & Check-Valve - 144-2000CV

• Supplied with Oil Saver Kit (Part No. 145-1000)

- Recommended when collecting High Viscosity oil to reduce lost of oil in pipe when machine not in operation

Specifications:

• Material - Stainless Steel
• Diameter - 62.5mm (2.5")
• Filter - Double filter plates/metal - Micro Mesh
• Top Mounted connector to 6mm Hose

Wogaard Side Mounted Vacuum Head - 144-2000SM

• Can be supplied instead of Top mounted Vacuum head (additional cost)

Specifications:

• Material - Stainless Steel
• Height - 30mm
• Diameter - 62.5mm (2.5")
• Filter - Double filter plates - Micro Mesh
• Side Mounted connector to 6mm Hose

Vacuum Protector

The main reason for using the Vacuum Protector is to avoid having to pull the vacuum out of heavy swarf when removing bins to empty.

Specifications:

• Material - Steel Fabrication with painted Black Finish
• 80mm Square Profile x 660mm High
• *750mm High version also available

Vacuum Protector with Clamp - 151-1001

• Clamp to profile tube and grip over bin

Vacuum Protector without Clamp - 151-1000

• Bolt hole available for fixed location in bin.