Walter Titex 0.531" 140° Solid Carbide Jobber Drill TiAlN Finish, Right Hand Cut, Spiral Flute, Whistle Notch Shank, 4.8819" OAL, Special Type Point 6618430 - 36147130
Brand: Walter Titex- SKU:
- 36147130
- ID:
- 729907
$299.44
Walter Titex 0.531" 140° Solid Carbide Jobber Drill TiAlN Finish, Right Hand Cut, Spiral Flute, Whistle Notch Shank, 4.8819" OAL, Special Type Point
Manufacturer Part #: 6618430
S/N: 36147130
UNSPSC: 23241634
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Drill Bit Size (Decimal Inch) | 0.5310 |
| Drill Bit Material | Solid Carbide |
| Drill Point Angle (Degrees) | 140 |
| Flute Type | Spiral |
| Cutting Direction | Right Hand |
| Point Type | Proprietary |
| Primary Workpiece Material | Cast Iron, Non-Ferrous Metal, Steel, Superalloys & Titanium |
| Coolant Through | Yes |
| Number of Flutes | 2 |
| Drill Bit Finish/Coating | TiAlN |
| Primary Workpiece Material Code | K, N, P, S |
| Shank Diameter (Decimal Inch) | 0.5510 |
| Overall Length (mm) | 124.00 |
| Overall Length (Decimal Inch) | 4.8819 |
| Spiral Type | Regular |
| Flute Length (mm) | 67.44 |
| Flute Length (Decimal Inch) | 2.6550 |
| Series | DC150 |
| Tool Application | Blind Hole, Stack Drilling |
| Flute By Diameter Ratio | 5xD |
| Shank Diameter (mm) | 14.00 |
| Maximum Drilling Depth (Decimal Inch) | 2.6550 |
| Maximum Drilling Depth (mm) | 67.44 |
| Shank Length (mm) | 45.00 |
| Shank Length (Decimal Inch) | 1.7717 |
| Drill Point Length (mm) | 2.46 |
| Drill Point Length (Decimal Inch) | 0.0967 |
| Drill Bit Diameter Tolerance | m7 |
| Shank Type | Whistle Notch |
| Standards | ANSI, ISO |
| Drill Bit Size Range (Decimal Inch) | 0.5000 - 0.6500 |
| Specification Designation | ISO |
| UNSPSC Code | 23241634 |
For more info, visit www.p65warnings.ca.gov.
