Acra High Speed Precision Lathe, 22" x 120" - ATEL-22120ACH

Brand:   Acra
SKU:
ATEL-22120ACH
ID:
108378
callling
$43,500.00
Current Stock:
Adding to cart… The item has been added

Acra

Acra High Speed Precision Lathe, 22" x 120"
ATEL-22120ACH


Features:

  • Meehanite cast iron, vibration stresses relieved
  • Induction hardened (HS70 degree) and precision ground
  • Precision hand scraped removable gap
  • Foot brake


Universal Gear Box:

  • Oil bath lubrication
  • Heat-treated gears
  • Inch/Metric/Module/Diametrical Threads
  • Output Shaft is designed with safety pin


Apron and Saddle:

  • Manual and automatic lubrication system. Oil distributor adjusted to lubricating bedways and cross slide or both.
  • Overload protection device
  • Cross slide is hardened and precision ground
  • Cross slide screws are hardened and oil bathed
  • Forward - Off - Reverse Lever
  • Top and saddle slide locking system
  • T-Slot Compound


Spindle:

  • Supported by 3 precision P-Grade taper roller bearings
  • Dynamically balanced, hardened and precision ground
  • ACH-2200/2600 Series: D1-11 Spindle Nose, Spindle Bore 4-1/8" (104 mm)


Headstock:

  • All gears made by chromium molybdenum steel and segmentation treated and precision ground
  • Forced lubrication system


Tailstock:

  • Quill made by chromium molybdenum steel with segmentation and precision ground
  • ACH-2200/2600 Series: Quill diameter 3" (75 mm) and Travel 7" (178 mm). Two-Speed with 1:1 and 1/4:1 change feeds.


Standard Equipment:

  • 15" 3-Jaw Chuck
  • Coolant System
  • 4 Way Tool Holder
  • Removable Gap
  • Steady Rest (1-3/5" ~ 10")
  • Halogen Light
  • Full Length Splash Guard


Specifications:

Item Number ATEL-22120ACH
Swing over Bed 22" (560 mm)
Swing over Gap 31.37" (797 mm)
Swing over Carriage 13.38" (340 mm)
Gap Width 10.63" (270 mm)
Bed Width 15.75" (400 mm)
Between Centers 120" (3050 mm)
Spindle
Spindle Nose D1-11
Spindle Bore 4-1/8" (104 mm)
Spindle Speeds - 60 Hz 13, 20, 30, 47, 70, 105, 150, 230, 340, 530, 800, 1200 RPM
Travel
Cross Slide 16" (400 mm)
Compound Slide 9.52" (242 mm)
Threads
Leadscrew Diameter
and Pitch
1-3/4" (45 mm) dia. x 4 TPI or 6mm Pitch
Range of Inch Threads 44 kinds - 2-72 TPI
Range of Metric Threads 39 kinds - 0.2 - 14 Pitc
Range of Module Threads 24 kinds - 0.2 - 3.5 MP
Range of Diametrical
Threads
24 kinds - 8-48 DP
Longitudinal Feed mm - 36 steps 0.0014 - 0.0408 inch/rev.
Cross Feed 1/2 of Longitudinal Feeds
Tail Stock
Quill Diameter 3" (75 mm)
Quill Travel 7" (178 mm)
Taper of Center MT No.5
Motor
Spindle Motor 15 HP (10.5 Kw)
Coolant 1/8 HP
Dimension
Length 177" (4500 mm)
Height 49" (1500 mm)
Width 47.2" (1200 mm)
Net Weight 6934 lbs. (3150 kgs)



See all Acra High Speed Precision Lathes, 22" Swing Over Bed


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Acra High Speed Precision Lathe, 22" x 120" - ATEL-22120ACH

Acra High Speed Precision Lathe, 22" x 120" - ATEL-22120ACH

Acra High Speed Precision Lathe, 22" x 120" - ATEL-22120ACH

$43,500.00