Clausing CLC2500 Radial Drill - CLC2500

Brand:   Clausing
SKU:
CLC2500
ID:
111407
$128,460.00
Current Stock:
Adding to cart… The item has been added

Clausing

Clausing Radial Drill CLC2500

Heavy-Duty, Large Capacity Radial Drill


Standard Features:

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Gears in gear box are cooled by oil cycled by a pump to minimize gear wear
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • Coolant system
  • Tool kit and manuals
  • 230/3/60 volt standard, other voltages by special order or transformer


Specifications:

Working Area
Column Sleeve Dia. (E) 21.65" (550mm)
Column Face to Spindle Center  
Maximum (D+C) 98.4" (2500mm)
Minimum (D) 19.7" (500mm)
Spindle Head Travel (C) 78.7" (2000mm)
Base Surface to Spindle End
Maximum (A) 78.7" (2000mm)
Minimum (B) 21.6" (550mm)
Arm Vertical Travel (A-B) 57.1" (1450mm)
Arm Rotation (Right & Left) 180°
Baseplate Working Surface 86.8" x 43.4" (2205 x 1102mm)
Box Table Area
Length (L) 39.4" (1000mm)
Width (K) 31.5" (800mm)
Height (H) 22" (560mm)
Base Dimensions
Floor Area (R x S) 138.6" x 55.1" (3520 x 1400mm)
Height (Q) 12.6" (320mm)

 

Drill Head 
Spindle Taper 6MT
Spindle Stroke 17.7" (450mm)
Quill Diameter 3.94" (100mm)
Number of Spindle Speeds 16
Spindle Speeds (rpm) 16-1250
Number of Steps 16
Spindle Feed Rate (in(mm)/rev.) 0.0015"(.04mm)-0.126"(3.20mm)
Spindle Drive Motor (2-speed) 10 hp (7.5 Kw)
Elevating Motor 5 hp (3.6 Kw)
Coolant Pump Motor 1/4 hp (.18 Kw)

 

Capacities
Drilling In Steel 3.15" (80mm)
Drilling In Cast Iron 3.98" (100mm)
Tapping In Steel 2.56" (65mm)
Tapping In Cast Iron 2.95" (75mm)
Boring In Steel 6" (150mm)
Boring In Cast Iron 10" (250mm)

 

Dimensions/Weights
Max. Machine Height (F) 157" (3990mm)
Base and Column Height (G) 151.6" (2660mm)
Shipping Dimensions
(L x W x H)
158" x 63" x 151.6"
4000mm x 1600mm x 3850mm 
Net Weight 24,250 lbs. (11000kg)
Shipping Weight 27,557 lbs. (12500kg)

Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Clausing CLC2500 Radial Drill - CLC2500

Clausing CLC2500 Radial Drill - CLC2500

Clausing CLC2500 Radial Drill - CLC2500

$128,460.00