Interstate HSS 118° Taper Length Drill Sets
- Grade: general purpose
- Drill type: standard
Tool Material:
HSS
- Provides good wear resistance in mild steels, soft metals (aluminum, copper, brass, bronze) and nonferrous materials.
- Taper length is a longer straight shank general purpose drill used where a deeper hole is required. Shank size is the same as the diameter of the drill.
Coating Advantages:
Black Oxide
- Retains lubricants to aid in wear resistance and chip flow
Specifications:
Item Number | 49-195-1 |
Sizes | 1/16 - 1/2" x 64ths |
System of Measurement | Inch |
Drill Bit Material | High Speed Steel |
Drill Point Angle | 118 |
Drill Bit Set Type | Taper Length Drill Bits |
Minimum Drill Bit Size (Inch) | 1/16 |
Drill Bit Finish/Coating | Oxide |
Maximum Drill Bit Size (Inch) | 1/2 |
Number of Pieces | 29 |
Drill Bit Size (Inch) | 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 11/64; 3/16; 13/64; 7/32; 15/64; 1/4; 17/64; 9/32; 19/64; 5/16; 21/64; 11/32; 23/64; 3/8; 25/64; 13/32; 27/64; 7/16; 29/64; 15/32; 31/64; 1/2 |
Point Type | Standard |
Step Increments (Inch) | 1/64 |
Set Includes | (26) Taper Length Drills |
Shank Type | Straight |
Storage Unit Type | Case |
Storage Unit Material | Metal |
Through Coolant | No |
Item Number | 49-196-9 |
Sizes | A - Z |
System of Measurement | Inch |
Drill Bit Material | High Speed Steel |
Drill Point Angle | 118 |
Drill Bit Set Type | Taper Length Drill Bits |
Minimum Drill Bit Size (Letter) | A |
Drill Bit Finish/Coating | Oxide |
Maximum Drill Bit Size (Letter) | Z |
Number of Pieces | 26 |
Drill Bit Size (Letter) | A; B; C; D; E; F; G; H; I; J; K; L; M; N; O; P; Q; R; S; T; U; V; W; X; Y; Z |
Point Type | Standard |
Set Includes | (26) Taper Length Drills |
Shank Type | Straight |
Storage Unit Type | Case |
Storage Unit Material | Metal |
Through Coolant | No |
For more info, visit www.p65warnings.ca.gov.