- The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
- The spindle is made of the finest case hardened steel for extra strength and wear
- The spindle is supported by double row taper roller and thrust ball bearings at the nose with thrust and radial axis bearings atthe top
- The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
- Push button controls are all reduced to 110V
- Electrical cir cuits are located in the built-in control box at the rear of the arm- this keeps the contols dust and humidity free while making them easily accessible for maintenance
- Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
- Arm raising safety device prevents arm from dropping
- Counter balanced mechanism for spindle return
- 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
- Centralized control center
- Automatic tool ejector
- Independent arm manual clamping system, which locks and unlocks the head and column
- Built in work light
- Coolant pump
- Tool kit
- Box table
| Overall Dimensions | 80 x 39 x 89 |
| Net Weight | 4620 pound |
| Number of Spindle speeds | 12 (45 - 1550) |
| Spindle Taper | 4 MT |
| T-Slots Number and Size (in.) | 3 & 3/4 |
| Column Diameter (in.) | 11-13/16 |
| Drilling Capacity Cast Iron (in.) | 2-5/16 |
| Drilling Capacity Mild Steel (in.) | 1-7/8 |
| Tapping Capacity Cast Iron (in.) | 1-1/2 |
| Tapping Capacity Mild Steel (in.) | 1 |
| Boring Capacity Steel (in.) | 3-3/8 |
| Boring Capacity Cast Iron (in.) | 4-3/4 |
| Distance Column to Spindle (max/in.) | 46 |
| Distance Column to Spindle (min/in.) | 13-3/4 |
| Travel of Head Horizontal (in.) | 35 |
| Distance Base to Spindle (max/in.) | 54 |
| Distance Base to Spindle (min/in.) | 19-3/8 |
| Arm Travel Vertical (in.) | 34-5/8 |
| Quill Travel (in.) | 9-7/8 |
| Quill Travel w/ Powerfeed engaged (in.) | 4 |
| Quill Down feed Rates (IPR) | 3 (.002, .004, .006) |
| Elevating Motor | 1HP |
| Table Size (in.) | 67-3/4 X 28 X 6-1/2 |
| Coolant Pump Motor | 1/8 HP |
| Machine Hieght from Floor (in.) | 109-1/2 |
| Table Dimensions (in.) | 27-7/8 X 20-1/4 X 16-152 |
For more info, visit www.p65warnings.ca.gov.
