Mitutoyo Peak Hold Absolute Digital Indicator ID-C with Flat Back, .5"/12.7mm Range - 543-302B-10
Brand: Mitutoyo- SKU:
- 543-302B-10
- ID:
- 686237
$504.00
Mitutoyo Peak Hold Absolute Digital Indicator ID-C with Flat Back, .5"/12.7mm Range - 543-302B-10
- Peak Hold Digimatic Indicator features both a Key Lock and Parameter Lock.
- The MAX/MIN/RANGE (run-out value) can be measured.
- A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably.
- Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin at power-on.
- Easy indicator setup via a setup menu.
- Analogue bar graph in the display (12 different scales switchable).
- GO/±NG tolerance judgement function.
- This indicator enables the use of a calculation function for the measured value Ax.
- Coefficient A is freely definable and x = displacement of the plunger.
- A USB interface box can be used to set up the indicator from PC via dedicated software.
Specifications:
- Resolution: .00005"0.0001"/.0005"/0.001 mm/0.01 mm Selectable
- Accuracy: ±.00010"/0.003mm
- Max. Permissible Error E MPE (Total Range): ±0.0001"/0.003 mm
- Scale: Electrostatic capacitance type absolute linear encoder
- H MPE (Hysteresis): 0.0001"/0.002 mm
- R MPE (Repeatability): 0.0001"/0.002 mm
- Measuring force MPL: ≤1.5 N
- Protection: IP42
- Type: ASME/ANSI/AGD Standard
- Display: LCD, character height 8 mm, 330° rotatable
- Max. response speed: Unlimited
- Measurement frequency (MAX/MIN/RANGE): Standard mode: 10 times/s fast mode: 50 times/s, (plunger speed max. 50 µm/s for peak measurement)
- Alarm: Low voltage, ABS composition error, overflow error, setting error
- Stem ∅: 9.52 mm
- Contact point: Carbide ball, thread: No.4-48UNF
- Power supply: 1 battery CR2032
- DATA/HOLD: Yes
- PRESET 3x: Yes
- Digimatic data output: Yes
- ON/OFF:Yes
- Analog bar resolution switchable: Yes
- Function lock:Yes
- GO/±NG judgement:Yes
- Fast measurement mode:Yes
- ABS / INC (INC ZERO):Yes
- Calculation function (with formula):Yes
- Counting direction switchable:Yes
- Inch/Metric switchable:Yes
