Rouse Indexable Boring Bars
- 90° approach angle.
- Internal Turning.
- Rigid clamp system for strong insert holding.
- Right Hand
- A new cutting-edge only requires removing a single screw and indexing the insert.
- It is not necessary to remove the tool from a chuck or tool post (as with brazed tip tools).
- Rouse's Triple-Tip bars may be used with boring heads, engine lathes, turret lathes and automatics where either the workpiece or the turn tools.
| Item No. | Length | Min. Bore Dia. | Distance Across Flats | Use Inserts |
| 22-595-130 | 3-1/2" | .400" | 5/8" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-131 | 4-1/4" | .400" | 5/8" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-150 | 4" | .550" | 5/8" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-151 | 5" | .550" | 5/8" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-161 | 5-3/4" | .700" | 5/8" | TPG32_ |
| 22-595-170 | 5" | .800" | 5/8" | TPG32_ |
| 22-595-230 | 3-1/4" | .400" | 9/16" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-231 | 4" | .400" | 9/16" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-250 | 3-3/4" | .550" | 9/16" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-251 | 4-3/4" | .550" | 9/16" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-260 | 4-1/2" | .700" | 9/16" | TPG32_ |
| 22-595-261 | 5-1/2" | .700" | 9/16" | TPG32_ |
| 22-595-331 | 3-3/4" | .400" | 7/16" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-340 | 3-1/4" | .475" | 7/16" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-341 | 4-1/8" | .475" | 7/16" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-350 | 3-1/2" | .550" | 7/16" | TPEE73_ or TPEE1.8(1.5)_ |
| 22-595-351 | 4-1/2" | .550" | 7/16" | TPEE73_ or TPEE1.8(1.5)_ |
22-595-910 Set Includes:
(1) A 375 S (3/4") (1) A 375 L (3/4") (1) A 500 S (3/4") (1) A 500 L (3/4") (1) A 625 S (3/4") (1) A 625 L (3/4") (1) A 750 S (3/4") (1) A 750 L (3/4")
22-595-920 Set Includes:
(1) B 375 S (5/8") (1) B 375 L (5/8") (1) B 500 S (5/8") (1) B 500 L (5/8") (1) B 625 S (5/8") (1) B 625 L (5/8")
22-595-930 Set Includes:
(1) C 375 S (1/2") (1) C 375 L (1/2") (1) C 437 S (1/2") (1) C 437 L (1/2") (1) C 500 S (1/2") (1) C 500 L (1/2")
