Suburban Tool Sine System Bolt-On Vacuum Chucks
Brand: Suburban Tool Inc.-Taft Peirce Metrology- ID:
- 95045
Suburban Tool Sine System Bolt-On Vacuum Chucks
Vacuum Sine Plate Chucks
- Made in U.S.A.
- Ideal accessories for the Sine System.
- Designed to bolt directly to a SineSet® sine plate or compound sine plate of the same size & series with little or no indicating.
- Bolt-on vacuum chucks can be used separately or with angle plate, sine plate or compound sine plate.
- Provides an excellent means for holding non-magnetic workpieces for light machining or grinding.
- Cast iron body with removable steel top plate allows convenient mounting of special top plates.
- Small, closely spaced holes in top plate provide maximum holding power with a minimum of distortion.
- Each chuck has three 1/4 NPT holes for mounting the vacuum gage, relief valve and hose fitting.
- The vacuum gage and relief valve are included.
- All chucks have back and end rails for positive location of workpieces.
Vacuum Chucks Specifications:
| Item Number | 77-171-7 | 77-172-5 |
| Model | VC-66-S1 | VC-612-S2 |
| SineSet Series | S1 | S2 |
| Length | 6" | 12" |
| Width | 6" | 6" |
| Height | 2-1/4" | 2-1/4" |
| Square & Parallel | 0.0002" | 0.0003" |
| Recommended Pump Size | 1/4 H.P. or Larger | 1/2 H.P. or Larger |
| Weight | 15 lbs. | 28 lbs. |
Rotary Vane Vacuum Pumps:
| Item Number | 77-176-6 | 77-178-2 |
| Model | VCP-14-MM | VCP-34-MM |
| Electric Motor | 1/4 HP, 110-115/208-230V, 50-60 Hz, 1 Phase | 3/4 HP, 110-115/208-230V, 50-60 Hz, 1 Phase |
| CFM Free Air - at 0" Hg | 4.5 | 8.0 |
| CFM Free Air - at 10" Hg | 2.6 | 5.0 |
| CFM Free Air - at 20" Hg | 1.0 | 2.4 |
| Maximum Vacuum | 10 PSI | 10 PSI |
| Weight | 32 lbs. | 54 lbs. |
For more info, visit www.p65warnings.ca.gov.
