TMX CAT50 Face Mill Holders
CAT50 Face Mill Holders
Made in Europe
- Pilot T.I.R. <0.0002"
- Four holes with 5/8”-11 thread on a 4” bolt circle diameter
- Designed to hold cutters 8” or larger
- Vibration reduction for extended spindle and tool life
- Certified balanced to 25,000 RPM at G2.5
- Taper ground to AT3 specification for maximum spindle contact
- H6 arbor tolerance for less chatter
- Pull stud thread is 1"-8
Item Number | 8-122-5202 | 8-122-5252 | 8-122-5254 |
Item Type | CAT50 Face Mill Holder | CAT50 Face Mill Holder | CAT50 Face Mill Holder |
Taper | CAT50 | CAT50 | CAT50 |
Arbor/Pilot Diameter (D2) | 2" | 2-1/2" | 2-1/2" |
Overall Length (L) | 7.3" | 7.5" | 9.1" |
Gage Length (L1) | 2.4" | 2.4" | 4" |
Arbor/Pilot Length (L2) | 15/16" | 1-1/8" | 1-1/8" |
Drive Key (L4) | 3/4" | 1" | 1" |
Major Diameter (D1) | 4.88" | 5.06" | 5.06" |
Weight | 13.2 lbs. | 14.0 lbs. | 18.5 lbs. |
For more info, visit www.p65warnings.ca.gov.