Ultra-Dex Indexable WCMX Drill Holders
- Spiral flutes to improve chip evacuation.
- Drill Diameter X Length Ratio: 2XD
- Uses 80º trigon inserts with 3 cutting edges.
- Inserts not included.
- Feed rates 3X faster than high speed steel.
- Perfect for machining centers.
- For drilling & Boring.
- Teeth: 2
- Coolant port on side of flange & in rear of shank.
- Insert pockets precisely positioned to keep cutting forces low and evenly distributed.
- Bodies manufactured from tool steel.
- Grade UD51 - General purpose CVD coated steel grade; used for roughing and semi-finishing of carbon ally & stainless steel.
Item No. | Shank Diameter d | Shank Length L3 | Length to Flange L1 | Max. Depth of Cut L2 | Use Insert# |
22-590-700 | 0.625" | 1.687" | 2.670" | 1.560" | WCMX1.8(1.5)2 |
22-590-702 | 0.625" | 1.687" | 2.670" | 1.650" | WCMX1.8(1.5)2 |
22-590-704 | 0.750" | 2.000" | 2.810" | 1.748" | WCMX2(1.5)2 |
22-590-706 | 0.750" | 2.000" | 2.810" | 2.131" | WCMX2(1.5)2 |
22-590-708 | 1.000" | 2.375" | 3.235" | 2.345" | WCMX2.522 |
22-590-710 | 1.000" | 2.375" | 3.235" | 2.375" | WCMX2.522 |
22-590-712 | 1.000" | 2.375" | 3.235" | 2.564" | WCMX2.522 |
22-590-714 | 1.250" | 2.619" | 3.866" | 2.710" | WCMX3(2.5)2 |
22-590-716 | 1.250" | 2.619" | 3.866" | 2.896" | WCMX3(2.5)2 |
22-590-718 | 1.250" | 2.619" | 4.426" | 3.418" | WCMX3(2.5)2 |
22-590-720 | 1.250" | 2.619" | 4.426" | 3.481" | WCMX3(2.5)2 |
22-590-722 | 1.500" | 2.875" | 5.025" | 4.019" | WCMX433 |
22-590-724 | 1.500" | 2.875" | 5.687" | 4.683" | WCMX433 |
22-590-726 | 1.500" | 2.875" | 5.687" | 5.057" | WCMX433 |
For more info, visit www.p65warnings.ca.gov.