Victor 1800S Series Precision Heavy Duty High Speed Lathes
Brand: Victor Machinery Solutions, Inc.- ID:
- 355902
Victor 1800S Series Precision Heavy Duty High Speed Lathes
High performance precision heavy-duty lathe with rigid one-piece Meehanite casting bed provides superior accuracy, durability, and reliability. Exceptional high quality construction results in stability and consistency.
Features:
- One piece heavy-duty cast iron base with a special exit for chips removal
- Oversized rigid compound rest for heavy cutting
- Hardened and precision ground gears and bedways
- Hardened and ground spindle nose
- Full Meehanite casting bed
- Headstock transmission gears driven by spline shafts
- The spindle is supported at 3 points by precision bearings
- Safety overload device
- Inch/metric threading without changing gears
- 7.5 HP main motor delivers full power at all 12 speeds
Standard Accessories:
- Removable gap
- Tailstock
- Coolant system
- Chuck cover with limit switch
- Full length foot brake
- D.P. / module thread change gears
- Threading dial indicator
- Center sleeve
- Dead center M.T. #4
- Leveling screws and pads
- Manual and parts list
| Swing over bed | 18" |
| Swing over cross slide | 11-5/16" |
| Swing over gap | 25-3/16" |
| Bed width | 11-13/16" |
| Spindle bore diameter | 2.37" |
| Spindle bore taper | M.T. #6 |
| Taper of center in sleeve | M.T. #4 |
| Spindle nose | D1-6 |
| Number of spindle speeds | 12 Steps |
| Range of spindle speeds | 30 ~ 2,000 rpm |
| Speed selections | 30, 55, 70, 95, 160, 200, 325, 540, 700, 1000, 1600, 2000 |
| Range of longitudinal feeds | 0.0012" ~ 0.0252"/rev. |
| Range of cross feeds | .0006" ~ 0.0126"/rev. |
| Inch threads | 2 ~ 56 TPI x 40 kinds |
| Metric threads | 0.4 ~ 14 mm x 52 kinds |
| Cross slide travel | 9" |
| Compound slide travel | 4-3/4" |
| Tailstock taper center | M.T. #4 |
| Tailstock quill travel | 5-9/10" |
| Main motor | 7.5 HP 3 Phase |
| Coolant pump | 1/8 HP |
For more info, visit www.p65warnings.ca.gov.
