Victor 5100RF Series Big Bore Heavy Duty Lathes
Brand: Victor Machinery Solutions, Inc.- ID:
- 356037
Victor 5160RF Series Big Bore Heavy Duty Lathes
Victor 5100RF series lathe is designed to provide outstanding performance and structural rigidity with large 6.02" spindle bore suitable for turning and cutting a large workpiece.
Features:
- 6.02" spindle bore is designed for large chucking capability
- Carbonized and precision ground Ni-Cr-Mo alloy steel gears and shafts
- The precision ground spindle is supported by high precision bearings suitable for both heavy and precision cutting
- One piece structure bed to enhance the machine life and working performance
- High tensile ribbed wide bed with hardened and precision ground bed ways for rigidity and low vibration
- Universal gearbox for inch, metric, D.P., and module threading without changing gears
- Oil bath lubrication and built-in safety clutch safeguard the continuous and proper operation of the gearbox
- Automatic forced lubrication system in the headstock
- Control of the main drive through the electromagnetic brake
- Tailstock is equipped with a two-speed quill that is suitable for heavy duty and easy drilling work
- Automatic lubrication device built inside the apron
- An overload safety device to protect feeding and threading operations
- 4-way power rapid traverse
Standard Accessories:
- Center sleeve
- Dead center M.T. #6
- Auto lubrication system
- Coolant system
- Tailstock with two-speed quill
- Removable gap
- 4-way power rapid traverse
- Leveling screws and pads
- Manual and parts list
- Tool box with tools
Machine Includes:
- Steady rest with rollers
- 4-way tool post
- Double chuck system
- Halogen work light
- On-carriage splash guard
- Chuck cover with limit switch
Optional Machine Accessories:
- Taper turning attachment
- Quick change tool post
- 3-jaw scroll chuck
- 4-jaw independent chuck
- Steady rest with Roller support
- Follow rest
- Full length splash guard
- Digital readout (DRO)
- Face plate with 4-Jaw
- Micro carriage stop
- Live center
- Rear chuck adapter
Swing over bed | 51" |
Swing over cross slide | 39.37” |
Swing over gap | 72.83” |
Bed width | 26" |
Spindle bore diameter | 6.02" (9.06" or 12.20" Opt.) |
Taper of center in sleeve | M.T. #6 |
Spindle nose | A2-11 (Opt. 9.06" or 12.20" bore is A2-20) |
Number of spindle speeds | 12 Steps |
Range of spindle speeds | 4 ~ 400 rpm |
Range of longitudinal feeds | 0.004" ~ 0.40"/rev. |
Range of cross feeds | 0.002" ~ 0.20"/rev. |
Inch threads | 1/4 ~ 30 TPI x 70 kinds |
Metric threads | 1 ~ 120 mm x 62 kinds |
Cross slide travel | 25" |
Compound slide travel | 16.50" |
Tailstock taper center | M.T. #6 |
Tailstock quill travel | 13.38" |
Main motor | 30 HP 3 Phase |
Coolant pump | 1/8 HP |
For more info, visit www.p65warnings.ca.gov.