JET 15" Variable Speed Floor Model Drill Presses

Brand:   Jet
ID:
101785
callling
Current Stock:

JET

JET 15" Variable Speed Floor Model Drill Presses


These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.

Features:

  • Full bearing support on quill for maximum spindle stiffness
  • Handwheel speed adjustment of 400 to 5,000 RPM
  • Large 2-1/4" quill for greater accuracy
  • 3" column diameter for maximum head support
  • 6" stroke for deep hole application
  • Accurate depth stop for precice hole depths
  • 1/2" drill chuck and arbor included
  • Safety collar

Specifications:

Item Number 354550 354551
Model J-A5816 J-A5818
Style (Type) Variable Variable
Drills to Center of Circle 15" 15"
Drilling Capacity Cast Iron 5/8" 5/8"
Drilling Capacity Mild Steel 1/2" 1/2"
Distance Column to Spindle 7-1/2" 7-1/2"
Number of Spindle Speeds Variable Variable
Range of Spindle Speeds (RPM) 400 - 5,000 400 - 5,000
Column Diameter 3" 3"
Spindle Taper (In. x TPI) MT-2 MT-2
Spindle Travel 6" 6"
Spindle Distance to Base 44-1/2" 44-1/2"
Spindle Distance to Table (Max.) 25-3/4" 25-3/4"
Table Travel 16-3/4" 16-3/4"
T-Slots Number and Size 2 and 1/2" 2 and 1/2"
T-Slot Centers 5-5/16" 5-5/16"
Table Size (L x W) 15" x 18" 15" x 18"
Work Table Weight Capacity 90 lbs. 90 lbs.
Base Dimensions 20-7/16" x 14-3/16" 20-7/16" x 14-3/16"
Base Work Table 12-1/8" x 11-13/16" 12-1/8" x 11-13/16"
Base Slots Number & Size 2 and 1/2" 2 and 1/2"
Motor (HP) 1 HP, 115/230V, 1-Phase 1 HP, 230/460V, 3-Phase
Prewired (V.)230V,
**SURCHARGE APPLIES
FOR 460V RE-WIRE
Overall Dimensions (L x W x H) 30" x 20" x 71" 30" x 20" x 71"
Weight 426 lbs. 426 lbs.


View the Instruction Manual


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

JET 15" Variable Speed Floor Model Drill Presses

JET 15" Variable Speed Floor Model Drill Presses

JET 15" Variable Speed Floor Model Drill Presses