Kent High Precision Engine Lathes w/ NEWALL DP-500 DRO
Complete with 1 Pc. Cast Base, 3" Spindle Bore & NEWALL DP-500 Digital Readout Installed!
Features:
- 7.3 HP main spindle motor, 12 speeds
- D1-8 camlock, 3.2” spindle bore
- Hardened and ground gears and bedways
- One piece solid casting base
- Jog button, multi-position feed stops
- Inch dials and leadscrews
- Centralized lube system in headstock
- Safety Foot brake
Complete with:
- 12" Face Plate
- 4-way Toolpost
- 8" 3-Jaw Chuck
- 10" 4-Jaw Chuck
- Toolbox with Tools
- Manual & Parts List
- Halogen Work Light
- Coolant System w/ Full Length Rear Splash Guard
- Steady Rest & Follow Rest
Specifications:
| Model | KLS-1840G | KLS-1860G |
| Swing Over Bed | 18" | 18" |
| Swing Over Cross Slide | 10.8" | 10.8" |
| Swing Over Gap | 27.2" | 27.2" |
| Width of Bed | 12" | 12" |
| Distance Between Centers | 40" | 60" |
| Cross Slide Travel | 11.4" | 11.4" |
| Top Slide Travel | 4.7" | 4.7" |
| Spindle Speeds | 12 | 12 |
| Spindle Speed Range | 25-2000 RPM | 32-2000 RPM |
| Through Hole Diameter | 3.2" | 3.2" |
| Spindle Nose | D1-8 | D1-8 |
| Spindle Bore Taper | MT#5 with sleeve | MT#5 with sleeve |
| Standard (Whit-Worth) | - | - |
| Metric Pitch | 24 (0.25 to 7) mm | 24 (0.25 to 7) mm |
| Longitudinal Feeds | 0.0011" - 0.0316" | 0.0011" - 0.0316" |
| Cross Feeds | 0.00024" - 0.0068" in/rev | 0.00024" - 0.0068" in/rev |
| Leadscrew Diameter | 1.38" | 1.38" |
| Thread Pitch | 4 TPI | 4 TPI |
| Quill Travel | 4.7" | 4.7" |
| Quill Diameter | 2.36" | 2.36" |
| Quill Bore Taper | MT#4 | MT#4 |
| Main Motor | 7.3 HP | 7.3 HP |
| Coolant Pump Motor | 0.05 HP | 0.05 HP |
| Overall Dimension | 88" x 36" x 51" | 100" x 36" x 51" |
| Packing Dimension | 93" x 39" x 64" | 114" x 39" x 64" |
| Net Weight | 3813 lbs. | 4542 lbs. |
| Gross Weight | 4365 lbs. | 5093 lbs. |
For more info, visit www.p65warnings.ca.gov.
