Roll-In Saw Journeyman Vertical Tool and Die Band Saw JM1220
From the digital speed control with readout to the calibrated tilt-table, the Journeyman Vertical JM1220 Tool and Die bandsaw from Roll-in Saw sets the standard for versatility. To increase operator efficiency, the tilt-table moves 11” front to back by counterweight pressure controlled with a foot pedal and lock.
The variable speed control, tilt-table “Adjusto-Blok®” blade guides, blade guard, chip-clearing funnel, chip blower, angle plate and blades all add up to high performance when making contour and profile cuts, rip cuts, and the most complex angle cuts.
Pressure for the table feed is supplied by a counterweight, that is adjustable, supplying fifteen pounds to sixty pounds of cutting pressure. Gravity supplies the power. The hydraulic regulator system further assures accurate chatter-free cutting speeds.
The standard tilting table combined with power feed makes compound angle cuts practical. This is a perfect precision-cutting machine for tool and die, R&D, and model shops.
| Technical Data | |
| Capacity Under Guides | 12-1/2” Maximum, table-to-guide |
| Throat | 20” |
| Frame | Welded steel |
| Blade Size | 3/4" Width x 12' 10" Length .035 Thick (bi-metal) |
| Blade Guard | Blade |
| Blade Guides | “Adjusto-Blok®” blade guides for 1/4” to 3/4" blade widths |
| Blade Speeds | 70 to 500 sfpm digital speed control with readout* |
| Table | 24” x 24” Precision ground steel, tilts 45° right, 10° left, 1° calibration marks |
| Feed Systems | Gravity feed |
| Wheels | Aluminum, 20-1/4” x 1-1/2” with polyurethane molded surface |
| Motor | 2HP, 220/440V, 60-cycle, three-phase |
| Dimensions | 46" Width x 80" Height x 30" Length |
| Shipping Weight | 1,000 lbs. F.O.B. Cleveland, Ohio |
Special Features:
- Table traverses: 11" front to back by counterweight pressure, controlled by foot pedal and lock
- Compressed air chip blower
For more info, visit www.p65warnings.ca.gov.
