BIRMINGHAM High Speed Precision Gap Bed Lathe, 26" x 120" - YCL-26120
Brand: Birmingham Machinery- SKU:
- YCL-26120
- ID:
- 112495
| Swing Over Bed | 26" |
| Distance Between Centers | 120" |
$39,995.00
BIRMINGHAM High Speed Precision Gap Bed Lathe
26" x 120" - YCL-26120
Features:
- 15 HP Main Motor
- One-piece cast iron base
- No change with 4" Bore
- No change gears required
- 16 Speeds from 25 ~ 1600 RPM
- 54 kinds of inch threads from 7/16 ~ 80 TPI
- 54 kinds of metric threads from 0.45 ~ 120mm
- Main spindle hardened & precision ground
- Bed made of fine grain high tensile cast iron
- Bedways induction hardened & precision ground
- All gears & shafts hardened & precision ground
- Main spindle supported at 3-point by precision bearings
Standard Accessories:
- Three Jaw Chuck
- Four Jaw Chuck
- Face Plate
- Steady Rest
- Follow Rest
- Thread Chasing Dial
- 113mm (1:20) MT5 Sleeve and MT5 Center
- Oil Gun
- One Set of Wrenches
- Operation Manual
- Drive Plate
- 4-Way Tool Post
- Rapid Travel
- Splash Guard
- Taper Turning Attachment
Special Accessories:
- Quick Change Tool Post
Specifications:
| Model | YCL-26120 |
| CAPACITY | |
| Swing over bed | 26" |
| Swing over cross slide | 17-1/4" |
| Swing in gap diameter | 36" |
| Length of Gap | 10" |
| Center Height | 13" |
| Distance between centers | 120" |
| Width of Bed | 16" |
| Max. Section of Tool | 1" x 1" |
| Max. Travel of Cross Slide | 14-1/2" |
| Max. Travel of Compound Rest | 9" |
| HEADSTOCK | |
| Spindle bore | 4-1/8" |
| Spindle nose | D1-8 |
| Taper of spindle bore | 113mm (1:20)/MT5 |
| Spindle Speed Step | 16 |
| Range of Spindle Speed | 25 ~ 1600 RPM |
| FEEDS AND THREADS | |
| Leadscrew Pitch | 40mm x 2 TPI |
| Inch Threads Range | 7/16 ~ 80 TPI |
| Metric Threads Range | 0.45 ~ 120mm (54 kinds) |
| Diametrical Pitches Range | 7/8 ~ 160 DP (42 kinds) |
| Module Pitches Range | 0.25 ~ 60 MP (46 kinds) |
| Cross Feeds Range in Metric Lead Screw | 0.044 ~ 1.48mm/rev (25 kinds) |
| Cross Feeds Range in Inch Lead Screw | 0.00165" ~ 0.05497"/rev (25 kinds) |
| Longitudinal Feeds Range in Metric Lead Screw | 0.022 ~ 0.74mm/rev (25 kinds) |
| Longitudinal Feeds Range in Inch Lead Screw | 0.00083" ~ 0.02774"/rev (25 kinds) |
| TAILSTOCK | |
| Travel of Tailstock Sleeve | 9-1/4" |
| Dia. of Tailstock Sleeve | 3-1/2" |
| Morse Taper of Tailstock Sleeve | MT5 |
| MOTOR | |
| Power of Main Motor | 11 KW (10 HP) |
| Power of Coolant Pump | 0.09 KW (1/8 HP) |
| DIMENSIONS AND WEIGHT | |
| Overall Dimension (L x W x H) | 4710" x 1230" x 1600" |
| Packing Size (L x W x H) | 4740" x 1140" x 1840" |
| Net Weight | 3710 kgs (8179 lbs.) |
| Gross Weight | 4300 kgs (9480 lbs.) |
For more info, visit www.p65warnings.ca.gov.
