KURT Sidewinder Vertical 2-1/2" Vise Brackets

KURT Sidewinder Vertical 2-1/2" Vise Brackets

SIDEWINDER™ VISE FOR 2nd OPERATION WORKHOLDING

to Mount with 6" & 8" VISES

The Kurt SideWinder is a vise that mounts vertically to the back of any Kurt 6” vise with an integral bracket. The bracket will include a stabilization leg that will mount to the table on the movable end of the vise and a workstop to position the height of the part.

Purpose: For doing 2nd op work holding the part vertically rather than horizontally.

• View Sidewinder Vise PDF Spec Sheet

Advantage:

• Saves set up time for 2nd op vertical work
• Machining can be done on both vises in the same setup
• Vise is at an elevated position which is more conducive to longer reach machining
• Has a stabilizer foot for vibration control
• Can be mounted to any Kurt industry standard 6" vise
• Has a round nut which controls deflection to a greater degree
• Does not interfere with the host vise
• Pull type vise
• AngLock design

Vise Features:

• Jaw width: 2.500"
• Jaw height: 1.063"
• Max. opening: 2.500"
• Max. clamping force: 2450 lbs.

Bracket Features:

• Adjustment range of workstop:0"-4.313"
• Hex size: 0.375"
• Overall bracket width: 14.000"
• Bracket height: 7.6"/8.4"
• Hex length: 0.453"
• Weight: 19 lbs.