Kennametal VBGT330LF KC5025 Carbide Turning Insert TiAlN Finish, Neutral, 16.61mm Long, 3/8" Inscribed Circle, 0.0039" Corner Radius, 3/16" Thick, 35° Diamond, Series Screw-On 1866681 - 00982876
Brand: Kennametal- SKU:
- 00982876
- ID:
- 671055
$49.20
Kennametal VBGT330LF KC5025 Carbide Turning Insert TiAlN Finish, Neutral, 16.61mm Long, 3/8" Inscribed Circle, 0.0039" Corner Radius, 3/16" Thick, 35° Diamond, Series Screw-On
Manufacturer Part #: 1866681
S/N: 00982876
UNSPSC: 23242105
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| ANSI Insert Code | VBGT3302 |
| ISO Insert Code | VBGT160401 |
| Relief Angle | 5 |
| Insert Style | VBGT |
| Corner Radius (Decimal Inch) | 0.0039 |
| Included Angle | 35 |
| Manufacturer Grade | KC5025 |
| Coating/Finish | TiAlN |
| Wiper Edge | No |
| Insert Hand | Neutral |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness (Decimal Inch) | 0.1875 |
| Series | Screw-On |
| Inscribed Circle (Inch) | 3/8 |
| Inscribed Circle (Decimal Inch) | 0.3750 |
| Insert Material | Carbide |
| Insert Shape | V - Diamond (Rhombic) 35-Deg |
| Chip Breaker Operation | Finishing, Light Machining |
| Grade Characteristics | Steel (P) - Moderate Wear-Resistance and Toughness, Stainless Steel (M) - Moderate Wear-Resistance and Toughness, Cast Iron (K) - Moderate Wear-Resistance and Toughness, Aluminum & Non-Ferrous (N) - Moderate Wear-Resistance and Toughness, Special, Super A |
| Number Of Cutting Edges | 2 |
| Side Clearance | Positive |
| Insert Shape Code | V |
| Hole Diameter (Decimal Inch) | 0.1732 |
| Hole Diameter (Mm) ( - 0 Decimals) | 4.40 |
| Maximum Depth of Cut (mm) | 1.25 |
| Maximum Depth of Cut (Decimal Inch) | 0.0492 |
| Insert Holding Method | Screw |
| Width (Inch) | 3/8 |
| Clearance Code | B |
| Tolerance Code | G |
| Coating Process | PVD |
| Length Range (Decimal Inch) | 0.7000 - 10.0000 |
| Rake | Positive |
| Insert Length (mm) | 16.61 |
| Insert Length (Decimal Inch) | 1.3076 |
| Primary Workpiece Material | Stainless Steel, Superalloys & Titanium |
| Primary Workpiece Material Code | P, M, K, N, S |
| Secondary Workpiece Material Code | S |
| Standards | ANSI, ISO |
| Manufacturers Catalog Number | 1866681 |
| Material Grade | C2, C6 |
| Coating Classification | PVD |
| Chip Breaker | LF |
| Rake Angle | 5 |
| Cutting Edge Style | Honed |
| Industry Standard Number | VBGT3302LF |
| Width (Decimal Inch - 4 Decimals) | 0.3750 |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | Turning, Facing, Boring, Back Turning, Back Boring |
| ANSI Size Code | 3302 |
| ISO Size Code | 160401 |
| UNSPSC Code | 23242105 |
| Insert Size Code | 3302 |
For more info, visit www.p65warnings.ca.gov.
