Kennametal CPGM3250 KC5025 Carbide Turning Insert TiAlN Finish, Neutral, 9.67mm Long, 3/8" Inscribed Circle, 0.0039" Corner Radius, 5/32" Thick, 80° Diamond, Series Screw-On 1868253 - 01046747
Brand: Kennametal- SKU:
- 01046747
- ID:
- 671088
$36.26
Kennametal CPGM3250 KC5025 Carbide Turning Insert TiAlN Finish, Neutral, 9.67mm Long, 3/8" Inscribed Circle, 0.0039" Corner Radius, 5/32" Thick, 80° Diamond, Series Screw-On
Manufacturer Part #: 1868253
S/N: 01046747
UNSPSC: 23242105
UPC: 662497804150
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| ANSI Insert Code | CPGM32502 |
| ISO Insert Code | CPGM09T301 |
| Relief Angle | 11 |
| Insert Style | CPGM |
| Corner Radius (Decimal Inch) | 0.0039 |
| Included Angle | 80 |
| Manufacturer Grade | KC5025 |
| Coating/Finish | TiAlN |
| Wiper Edge | No |
| Insert Hand | Neutral |
| Insert Thickness (Inch) | 5/32 |
| Insert Thickness (Decimal Inch) | 0.1563 |
| Series | Screw-On |
| Inscribed Circle (Inch) | 3/8 |
| Inscribed Circle (Decimal Inch) | 0.3750 |
| Insert Material | Carbide |
| Insert Shape | C - Diamond (Rhombic) 80-Deg |
| Chip Breaker Operation | Medium Machining |
| Grade Characteristics | Steel (P) - Moderate Wear-Resistance and Toughness, Stainless Steel (M) - Moderate Wear-Resistance and Toughness, Cast Iron (K) - Moderate Wear-Resistance and Toughness, Aluminum & Non-Ferrous (N) - Moderate Wear-Resistance and Toughness, Special, Super A |
| Number Of Cutting Edges | 2 |
| Side Clearance | Positive |
| Insert Shape Code | C |
| Hole Diameter (Decimal Inch) | 0.1732 |
| Hole Diameter (Mm) ( - 0 Decimals) | 4.40 |
| Maximum Depth of Cut (mm) | 1.25 |
| Maximum Depth of Cut (Decimal Inch) | 0.0492 |
| Insert Holding Method | Screw |
| Width (Inch) | 3/8 |
| Clearance Code | P |
| Tolerance Code | G |
| Coating Process | PVD |
| Length Range (Decimal Inch) | 0.3000 - 0.4000 |
| Rake | Positive |
| Insert Length (mm) | 9.67 |
| Insert Length (Decimal Inch) | 0.3808 |
| Primary Workpiece Material | Stainless Steel, Superalloys & Titanium |
| Primary Workpiece Material Code | P, M, K, N, S |
| Secondary Workpiece Material Code | S |
| Standards | ANSI, ISO |
| Manufacturers Catalog Number | 1868253 |
| Material Grade | C2, C6 |
| Coating Classification | PVD |
| Chip Breaker | Common |
| Rake Angle | 5 |
| Cutting Edge Style | Honed |
| Industry Standard Number | CPGM32502 |
| Width (Decimal Inch - 4 Decimals) | 0.3750 |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | Turning, Facing, Boring |
| ANSI Size Code | 32502 |
| ISO Size Code | 09T301 |
| UNSPSC Code | 23242105 |
| Insert Size Code | 32502 |
For more info, visit www.p65warnings.ca.gov.
