Tungaloy TNMG432TM AH120 Carbide Turning Insert TiAlN Finish, 1/2" Inscribed Circle, 1/32" Corner Radius, 60° Triangle 6808633 - 01683655
Brand: Tungaloy- SKU:
- 01683655
- ID:
- 677909
$20.76
Tungaloy TNMG432TM AH120 Carbide Turning Insert TiAlN Finish, 1/2" Inscribed Circle, 1/32" Corner Radius, 60° Triangle
Manufacturer Part #: 6808633
S/N: 01683655
UNSPSC: 23242105
UPC: 677162086335
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| ANSI Insert Code | TNMG432 |
| ISO Insert Code | TNMG220408 |
| Relief Angle | 0 |
| Insert Style | TNMG |
| Corner Radius (Inch) | 1/32 |
| Corner Radius (Decimal Inch) | 0.0315 |
| Included Angle | 60 |
| Manufacturer Grade | AH120 |
| Coating/Finish | TiAlN |
| Wiper Edge | No |
| Insert Hand | Neutral |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness (Decimal Inch) | 0.1875 |
| Series | TNMG-TM |
| Inscribed Circle (Inch) | 1/2 |
| Inscribed Circle (Decimal Inch) | 0.5000 |
| Insert Material | Carbide |
| Insert Shape | T - Triangle |
| Chip Breaker Operation | Roughing, Medium Machining |
| Grade Characteristics | Steel (P) - Moderate Wear-Resistance and Toughness to High Toughness, Stainless Steel (M) - Moderate Wear-Resistance and Toughness to High Toughness, Cast Iron (K) - High Wear-Resistance to Moderate Wear-Resistance and Toughness, Special, Super Alloys (S) |
| Number Of Cutting Edges | 6 |
| Side Clearance | Negative |
| Insert Shape Code | T |
| Hole Diameter (Decimal Inch) | 0.2030 |
| Maximum Depth of Cut (Decimal Inch) | 0.1969 |
| Insert Holding Method | Clamp, Pin |
| Clearance Code | N |
| Tolerance Code | M |
| Coating Process | PVD |
| Length Range (Decimal Inch) | 0.7000 - 10.0000 |
| Rake | Negative |
| Insert Length (Decimal Inch) | 0.8660 |
| Primary Workpiece Material | Steel, Stainless Steel, Cast Iron, Superalloys & Titanium, Hard Material |
| Primary Workpiece Material Code | P, M, K, S |
| Iso Code | TNMG 432 TM |
| Standards | ANSI, ISO |
| Manufacturers Catalog Number | 6808633 |
| Material Grade | P15, P25, M15, M25, K15, K30, S10, S25 |
| Coating Classification | PVD |
| Chip Breaker | TM |
| Rake Angle | -6 |
| Cutting Edge Style | Sharp |
| Industry Standard Number | TNMG 432 TM |
| Width (Decimal Inch - 4 Decimals) | 0.8660 |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | Turning, Facing, Boring |
| ANSI Size Code | 432 |
| ISO Size Code | 220408 |
| UNSPSC Code | 23242105 |
| Insert Size Code | 432 |
For more info, visit www.p65warnings.ca.gov.
