Clausing Manual Surface Grinder: 20" Table Length, 10" Table Width, 3 Phase, 3,450 RPM, 230 & 460V 3 hp, 1-1/4" Arbor Hole Dia, 8" Wheel Dia, 1" Wheel Width CSG3A1020 - 02589018
Brand: Clausing- SKU:
- 02589018
- ID:
- 873193
$64,720.58
Clausing Manual Surface Grinder: 20" Table Length, 10" Table Width, 3 Phase, 3,450 RPM, 230 & 460V 3 hp, 1-1/4" Arbor Hole Dia, 8" Wheel Dia, 1" Wheel Width
Manufacturer Part #: CSG3A1020
S/N: 02589018
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Arbor Hole Diameter (Decimal Inch) | 1.2500 |
| Arbor Hole Diameter | 31.75mm, 1.25in |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Arbor Hole Diameter (mm) | 31.75 |
| Operation Type | Automatic |
| Machine Type | Floor |
| Spindle Speed | 3450RPM |
| Table Length | 508mm, 20in |
| Wheel Diameter (Inch) | 8 |
| Table Width | 254mm, 10in |
| Wheel Diameter | 203.2mm, 8in |
| Wheel Width (Decimal Inch) | 1.0000 |
| Wheel Width (Inch) | 1 |
| Wheel Width | 25.4mm, 1in |
| Table Speed | 196.8500 to 984.2520 in/min, 5.00 to 25.00 m/min |
| Phase | 3 |
| Maximum Cross Grinding Width (Decimal Inch) | 11.0000 |
| Maximum Cross Grinding Width (Inch) | 11 |
| Maximum Cross Grinding Width (mm) | 279.40 |
| Hydraulic Motor Horsepower (HP) | 2.00 |
| AC Motor Horsepower | 3hp |
| Maximum Automatic Crossfeed Transverse Travel | 270mm, 10.6299in |
| Maximum Cross Grinding Width | 279.4mm, 11in |
| Maximum Spindle Centerline To Table Distance | 19.68in |
| Maximum Spindle Centerline to Table Distance (mm) | 19.68 |
| Maximum Longitudinal Table Travel | 580mm, 620mm, 22.8347in, 24.4094in |
| Maximum Longitudinal Grinding Length | 520mm, 20.4724in |
| Feed Per Graduation Of Handwheel | 0.0008in |
| Maximum Manual Crossfeed Transverse Travel | 300mm, 11.81102in |
| Feed Per Revolution Of Handwheel | 0.1969in |
| Feed Rate Per Graduation Of Handwheel | 0.02mm |
| Feed Rate Per Revolution Of Handwheel | 5mm |
| Overall Length (Inch) | 95 |
| Voltage | 230/460 V |
| Overall Length | 95in, 2400mm |
| Vertical Downfeed Handwheel Per Graduation | 0.005mm, 0.0002in |
| Vertical Downfeed Handwheel Per Revolution | 1mm, 0.0394in |
| Vertical Downfeed Rapid Travel | 6in/min |
| Max. Longitudinal Grinding Length (Decimal Inch) | 20.4724 |
| Max. Spindle Center to Table Dist. (Decimal Inch) | 19.6800 |
| Max. Hydraulic Long. Table Travel (Decimal Inch) | 22.8347 |
| Max. Manual Cross Transverse Travel (Decimal Inch) | 11.811020in |
| Feed Per Revolution of Handwheel (Decimal Inch) | 0.1969 |
| Feed Rate Per Revolution of Handwheel (mm) | 5.00 |
| Feed Per Graduation of Handwheel (Decimal Inch) | 0.0008 |
| Feed Rate Per Graduation of Handwheel (mm) | 0.02 |
| Vertical Down Handwheel Per Rev. (Decimal Inch) | 0.0394 |
| Vertical Downfeed Handwheel Per Revolution (mm) | 1.00 |
| Vertical Down Handwheel Per Grad. (Decimal Inch) | 0.0002 |
For more info, visit www.p65warnings.ca.gov.
