Morse 175Q56R30 1-3/4 Centerline Distance, 30:1, 58 RPM Output, 3/4 Input Horsepower, 472 Lbs. Max Torque, Speed Reducer 7/8" Shaft Diam, Single Shaft Right, 5/8" Bore, 4.81" Long x 3.38" Wide x 5-3/4" High, 56C NEMA 175Q56R30 - 08433534
Brand: Morse- SKU:
- 08433534
- ID:
- 559286
$1,551.62
Morse 175Q56R30 1-3/4 Centerline Distance, 30:1, 58 RPM Output, 3/4 Input Horsepower, 472 Lbs. Max Torque, Speed Reducer 7/8" Shaft Diam, Single Shaft Right, 5/8" Bore, 4.81" Long x 3.38" Wide x 5-3/4" High, 56C NEMA, 214 In/Lb. Min Torque
Manufacturer Part #: 175Q56R30
S/N: 08433534
UNSPSC: 26111500
UPC: 662288343332
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Centerline Distance | 1.7500 | |
| Reducer Type | C-Face | |
| Shaft Type | Single | |
| Ratio | 30 | 1 |
| Shaft Orientation | Right Angle | |
| Center-to-center Shaft Distance | 1.7500in | |
| Speed Ratio | 30 | 1 |
| Maximum Input Horsepower | 3/4 | |
| Nema/Iec Frame Size | 56C NEMA | |
| Maximum Input Speed | 1750.0 | |
| Minimum Torque (In/Lb) | 214.0 | |
| Maximum Torque (In/Lb.) | 472.0 | |
| Bore Diameter (Decimal Inch) | 0.6250 | |
| Shaft Diameter (Decimal Inch) | 0.8750 | |
| Gear Type | Worm | |
| Housing Material | Cast Iron | |
| Gear Material | Bronze | |
| Overall Length (Decimal Inch) | 5.0600 | |
| Standards | NEMA | |
| Minimum Input Horsepower | 0.25 | |
| Output RPM at 1750 Input | 58.0 | |
| Torque Output (In/Lb) with 1/2 Horsepower Motor @ 1750 | 429 | |
| Torque Output (In/Lb) with 1/3 Horsepower Motor @ 1750 | 283 | |
| Torque Output (In/Lb) with 3/4 Horsepower Motor @ 1750 | 472 | |
| Torque Output (In/Lb) with 1/4 Horsepower Motor @ 1750 | 214 | |
| Height (Decimal Inch) | 5.7500 | |
| Length (Decimal Inch - 4 Decimals) | 4.8100 | |
| Width (Decimal Inch - 4 Decimals) | 3.3800 | |
| UNSPSC Code | 26111500 |
For more info, visit www.p65warnings.ca.gov.
