Walter Titex 8mm 140° Solid Carbide Jobber Drill TiSiAlCrN/AlTiN Finish, Right Hand Cut, Spiral Flute, Straight Shank, 91mm OAL 7377529 - 10614626
Brand: Walter Titex- SKU:
- 10614626
- ID:
- 729911
$252.21
Walter Titex 8mm 140° Solid Carbide Jobber Drill TiSiAlCrN/AlTiN Finish, Right Hand Cut, Spiral Flute, Straight Shank, 91mm OAL
Manufacturer Part #: 7377529
S/N: 10614626
UNSPSC: 23241634
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Drill Bit Size (mm) | 8.00 |
| Drill Bit Size (Decimal Inch) | 0.3150 |
| Drill Bit Material | Solid Carbide |
| Drill Point Angle (Degrees) | 140 |
| Coating/Finish | Multi-layer |
| Flute Type | Regular Spiral |
| Cutting Direction | Right Hand |
| Primary Workpiece Material | Steel, Cast Iron, Aluminum & Non-Ferrous |
| Coolant Through | Yes |
| Number of Flutes | 2 |
| Primary Workpiece Material Code | K, N, P, S |
| Overall Length (mm) | 91.00 |
| Overall Length (Decimal Inch) | 3.5827 |
| Flute Length (mm) | 53.00 |
| Flute Length (Decimal Inch) | 2.0866 |
| Series | DC160 |
| Proprietary Coating/Finish | TiSiAlCrN/AlTiN |
| Tool Application | Blind Hole, Cross Hole, Inclined Hole Exit, Stack Drilling |
| Flute By Diameter Ratio | 5xD |
| Shank Diameter (mm) | 8 |
| Maximum Drilling Depth (mm) | 43.00 |
| Shank Length (mm) | 36 |
| Shank Length (Decimal Inch) | 1.4170 |
| Drill Point Length (mm) | 1.46 |
| Drill Bit Diameter Tolerance | m7 |
| Shank Type | Straight |
| Standards | ANSI, ISO |
| Drill Bit Grade | High Performance |
| Drill Bit Size Range (Decimal Inch) | 0.3000 - 0.3500 |
| Drill Bit Size Range (mm) | 8.00 - 9.00 |
| Material Grade | WJ30ET |
| UNSPSC Code | 23241634 |
For more info, visit www.p65warnings.ca.gov.
