SIMALUBE Automatic Single Point Lubricator 250 mL, 10 pack, with fluid grease SL06 - 10xSL06-250

Brand:   Simatec
SKU:
10xSL06-250
ID:
322707
$1,095.00
Current Stock:
Adding to cart… The item has been added

SIMALUBE Automatic Single Point Lubricator 250 mL, 10 pack, with fluid grease SL06 - 10xSL06-250


The Simalube automatic lubrication system offers an efficient method to lubricate bearings or chains. There is no need for an expensive central lubrication system or to always remember to send someone with a lubrication gun to lubricate bearings. The Simalube lubricators have an adjustable dial that lets you set the amount of months you wish to have the lubricators release all the grease or oil. Attach the lubricator to the bearing block or chain brush and set it for “x” months. No need to worry about over or under lubrication. This greatly helps prevent premature bearing failure!


Item #: 10xSL00 - 10 pack, Simalube lubricator empty for self-filling

  • These packs come complete with 10x lubricators that are prepared to be filled, 1x 3mm allen key to adjust the dial, and operating instructions.


Item #: 10xSL01 - 10 pack, Simalube lubricator with multipurpose grease


Item #: 10xSL06 - 10 pack, Simalube lubricator with fluid grease SL06


Item #: SL50 - Replacement cartridge w/ dry cell

  • Simalube lubricator replacement dry cell cartridge. This cartridge will allow you to refill your lubricator and use it again.



Sold millions of times and suitable for any single point lubricating task with grease or oil. The automatic lubricator simalube provides all possible kinds of lubricating points with lubricant. 24 hours, day in, day out. Roller bearings which are not lubricated sufficiently or wrongly drop out long before they have reached their expected product life. simalube lubricators guarantee a consistent supply of lubricant in the pre-adjusted proportioning. Shutdown times are decreased and costs in comparison to time-consuming lubrication by hand are clearly reduced.

Within seconds simalube is fixed to the lubricating point. On commissioning, a gasproduction cell is activated which presses the lubricant on the lubrication point through the release of hydrogen gas. The lubricating amount can be steplessly adjusted by means of an Allen key. Filled with oil, simalube is applied for the automatic lubrication of chains, open gears or guide rails for example.


Technical Information:

The simalube lubricator is available with a content of 30ml, 60ml, 125ml and 250ml. The compact installation size of the simalube is ideal for limited space.

 

Product Automatic longterm grease and oil dispenser
Power generation hydrogen gas producing drycells
Working pressure max. 5 bar
Adjustment stepless 1-12 month
Dispensing quantity 0.08 - 8.3 ml/day
Operating temperature from -20°C to + 55°C
Usage Grease dispenser can be installed in any position, even under water. Attention: do not expose to direct heat.
Certifications / Approvals
Ingress protection IP68 (dustproof and waterproof)
Usage period within 2 years of filling date
Stock temperature recommended at 20°C +/- 5°C

 

Sizes 30 ml 60 ml 125 ml 250 ml
Weight full ~82g ~115g ~190g ~335g
Weight empty ~55g ~60g ~75g ~111g



See all versions of the SIMALUBE Automatic Single Point Lubricators


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

SIMALUBE Automatic Single Point Lubricator 250 mL, 10 pack, with fluid grease SL06 - 10xSL06-250

SIMALUBE Automatic Single Point Lubricator 250 mL, 10 pack, with fluid grease SL…

SIMALUBE Automatic Single Point Lubricator 250 mL, 10 pack, …

$1,095.00