KYOCERA SGS 1" Diam 7 Flute Solid Carbide 0.03" Corner Radius End Mill Ti-NAMITE-M Finish, 7" OAL, 4" LOC, 1" Shank Diam, 37° Helix, RH Cut, RH Flute 77329 - 15163538
Brand: KYOCERA SGS- SKU:
- 15163538
- ID:
- 618520
$855.47
KYOCERA SGS 1" Diam 7 Flute Solid Carbide 0.03" Corner Radius End Mill Ti-NAMITE-M Finish, 7" OAL, 4" LOC, 1" Shank Diam, 37° Helix, RH Cut, RH Flute
Manufacturer Part #: 77329
S/N: 15163538
UNSPSC: 27112803
UPC: 691781773292
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Mill Diameter (Inch) | 1 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Number Of Flutes | 7 |
| Length of Cut (Inch) | 4 |
| Length of Cut (mm) | 101.60 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | TM |
| Overall Length (Inch) | 7 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0300 |
| Variable Index | Yes |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Pitch | Close |
| Overall Length (Decimal Inch) | 7.0000 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Length Type | Long |
| Flute Type | Helical |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Finishing |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (mm) | 25.40 |
| Corner Radius Tolerance | -0.0020 to 0.0000 in |
| Mill Diameter Tolerance | -0.0020 to 0.0000 in |
| Shank Diameter Tolerance | h6 |
| Overall Length Tolerance | 0.0620 to -0.0620 in, 0.0620 to -0.0620 mm |
| Primary Workpiece Material | Steel, Stainless Steel, Cast Iron, Superalloys & Titanium |
| Primary Workpiece Material Code | P, M, K, S |
| UNSPSC Code | 27112803 |
| Secondary Workpiece Material | Hard Material |
| Secondary Workpiece Material Code | H |
| Material Grade | Micrograin |
| Series | 77C |
| Product Service Code | 3445 |
| Material Application | Steel, Stainless Steel, Cast Iron, Superalloys & Titanium, Hard Material |
| For Use With. | End Mill Holders |
| Helix Style | High |
For more info, visit www.p65warnings.ca.gov.
