Seco Tools WNMA432 TK1501 Carbide Turning Insert Ti(C/N)/Al2O3/Cr Finish, Neutral, 0.3425" Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80° Trigon 03064542 - 37817178
Brand: Seco Tools- SKU:
- 37817178
- ID:
- 676821
$27.98
Seco Tools WNMA432 TK1501 Carbide Turning Insert Ti(C/N)/Al2O3/Cr Finish, Neutral, 0.3425" Long, 1/2" Inscribed Circle, 1/32" Corner Radius, 80° Trigon
Manufacturer Part #: 03064542
S/N: 37817178
UNSPSC: 23242105
(Minimum Order Quantity=10)
(Please order in multiples of 10)
Specifications:
| ANSI Insert Code | WNMA432 |
| ISO Insert Code | WNMA080402 |
| Relief Angle | 0 |
| Insert Style | WNMA |
| Corner Radius (Inch) | 1/32 |
| Corner Radius (Decimal Inch) | 0.0315 |
| Included Angle | 80 |
| Manufacturer Grade | TK1501 |
| Coating/Finish | TiCN, Al2O3, Cr |
| Wiper Edge | No |
| Insert Hand | Neutral |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness (Decimal Inch) | 0.1874 |
| Series | WNMA-Flat Top |
| Inscribed Circle (Inch) | 1/2 |
| Inscribed Circle (Decimal Inch) | 0.5000 |
| Insert Material | Carbide |
| Insert Shape | W - Trigon 80-Deg |
| Chip Breaker Operation | Flat Top |
| Grade Characteristics | Steel (P) - High Wear-Resistance to Moderate Wear-Resistance and Toughness, Stainless Steel (M) - High Wear-Resistance to Moderate Wear-Resistance and Toughness, Cast Iron (K) - High Wear-Resistance to High Toughness |
| Number Of Cutting Edges | 6 |
| Side Clearance | Negative |
| Insert Shape Code | W |
| Hole Diameter (Decimal Inch) | 0.2028 |
| Maximum Depth of Cut (Decimal Inch) | 0.3110 |
| Insert Holding Method | Clamp, Pin, Lever Lock |
| Width (Inch) | 1/2 |
| Clearance Code | N |
| Tolerance Code | M |
| Coating Process | CVD |
| Length Range (Decimal Inch) | 0.6500 - 0.7000 |
| Rake | Negative |
| Insert Length (Decimal Inch) | 0.6850 |
| Primary Workpiece Material | Cast Iron |
| Primary Workpiece Material Code | P, M, K |
| Secondary Workpiece Material | Steel, Stainless Steel |
| Secondary Workpiece Material Code | P, M |
| Iso Code | WNMA080408 |
| Standards | ANSI, ISO |
| Manufacturers Catalog Number | 03064542 |
| Material Grade | K10, K20, K30 |
| Proprietary Coating Designation | Duratomic |
| Lead Angle | 80 |
| Coating Classification | Duratomic |
| Chip Breaker | Flat Top |
| Rake Angle | 0 |
| Cutting Edge Style | Chamfered, Honed |
| Industry Standard Number | WNMA432 |
| Width (Decimal Inch - 4 Decimals) | 0.5000 |
| Width (mm - 2 Decimals) | 8.70 |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | Boring, Facing, Turning |
| ANSI Size Code | 432 |
| ISO Size Code | 080402 |
| UNSPSC Code | 23242105 |
| Insert Size Code | 432 |
For more info, visit www.p65warnings.ca.gov.
