Sumitomo GCMN4008-MG AC530U Carbide Grooving Insert TiAlN/AlCrN Finish, Neutral, 4mm Cutting Width, Series GND 18HMALW - 45206315
Brand: Sumitomo- SKU:
- 45206315
- ID:
- 651679
$29.55
Sumitomo GCMN4008-MG AC530U Carbide Grooving Insert TiAlN/AlCrN Finish, Neutral, 4mm Cutting Width, Series GND
Manufacturer Part #: 18HMALW
S/N: 45206315
UNSPSC: 23242105
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Insert Style | GCM |
| Insert Size Code | 4008 |
| Cutting Width (Decimal Inch) | 0.1575 |
| Cutting Width (mm) | 4.00 |
| Insert Hand | Neutral |
| Insert Material | Solid Carbide |
| Manufacturer Grade | AC530U |
| Full Radius | No |
| Corner Radius (Decimal Inch) | 0.0315 |
| Corner Radius (mm) | 0.80 |
| Insert Holding Method | Screw |
| Insert Size | 4008 |
| Cutting Height (mm) | 4.00 |
| Cutting Height (Decimal Inch) | 0.1575 |
| Multi-use Tool | No |
| Series | GND |
| Coating Process | PVD |
| Overall Length (Decimal Inch) | 1.0394 |
| Overall Length (mm) | 26.40 |
| Primary Workpiece Material | Stainless Steel, Steel |
| Primary Workpiece Material Code | M, P |
| Secondary Workpiece Material | Cast Iron, Hard Material, Non-Ferrous Metal, Superalloy, Titanium |
| Secondary Workpiece Material Code | H, K, N, S |
| Ansi Code | GCMN4008-MG |
| Iso Code | ISO 13399 |
| Standards | ANSI, ISO 13399 |
| Chip Breaker | MG |
| Insert Seat Size | 4 |
| Overall Width (mm) | 4.00 |
| Overall Width (Decimal Inch - 4 Decimals) | 0.1575 |
| Coating/Finish | AlCrN, TiAlN |
| Single Or Double End | Double |
For more info, visit www.p65warnings.ca.gov.
