Walter Tools WNMA433-RK5 WKK10S Carbide Grooving Insert TiAlN/TiN/TiCN/Al2O3/TiCN Finish, LH, 3.18mm Cutting Width, Series Notch-Grip & Tiger-tec Silver 6411986 - 53080800
Brand: Walter Tools- SKU:
- 53080800
- ID:
- 652125
$27.23
Walter Tools WNMA433-RK5 WKK10S Carbide Grooving Insert TiAlN/TiN/TiCN/Al2O3/TiCN Finish, LH, 3.18mm Cutting Width, Series Notch-Grip & Tiger-tec Silver
Manufacturer Part #: 6411986
S/N: 53080800
UNSPSC: 23242105
(Minimum Order Quantity=10)
(Please order in multiples of 10)
Specifications:
| Insert Style | INGD, WNMA |
| Insert Size Code | 433 |
| Cutting Width (Decimal Inch) | 0.1250 |
| Cutting Width (mm) | 3.18 |
| Insert Hand | Left Hand |
| Maximum Depth of Cut (mm) | 5.00 |
| Insert Material | Solid Carbide |
| Manufacturer Grade | IC807, WKK10S |
| Corner Radius (Decimal Inch) | 0.0469 |
| Corner Radius (mm) | 0.19 |
| Rake | Negative |
| Insert Holding Method | Pin, Clamp |
| Insert Size | 3125, 433 |
| Material Grade | Submicron, K10, H30 |
| Multi-use Tool | Yes |
| Series | Notch-Grip, Tiger-tec Silver |
| Coating Process | CVD, PVD |
| Rake Angle | 0.00 |
| Overall Length (Decimal Inch) | 0.9900 |
| Overall Length (mm) | 25.14 |
| Primary Workpiece Material | Cast Iron |
| Primary Workpiece Material Code | K |
| Secondary Workpiece Material | Hard Material |
| Secondary Workpiece Material Code | H |
| Ansi Code | INGD3125L IC807 |
| Iso Code | INGD3125L IC807 |
| Standards | ANSI, ISO |
| Maximum Corner Radius (Decimal Inch) | 0.0075 |
| Manufacturers Catalog Number | 6411986 |
| Insert Thickness (Decimal Inch) | 0.3440 |
| Inscribed Circle (Decimal Inch) | 0.5000 |
| Thickness (Inch) | 3/16 |
| Chip Breaker | RK5 |
| Inscribed Circle (Inch) | 1/2 |
| Hole Diameter (Decimal Inch) | 0.2020 |
| Overall Width (mm) | 4.95 |
| Overall Width (Decimal Inch - 4 Decimals) | 0.1950 |
| Included Angle Degree | 80 |
| Coating/Finish | TiAlN, TiN |
| Single Or Double End | Double |
| Insert Thickness | 8.74 |
For more info, visit www.p65warnings.ca.gov.
