Kennametal 3/16" Diam, 19/64" LOC, 3 Flute Solid Carbide Ball End Mill AlTiN Finish, Single End, 1-1/2" OAL, 1/4" Shank Diam, Spiral Flute 4169834 - 58454554
Brand: Kennametal- SKU:
- 58454554
- ID:
- 609302
$40.60
Kennametal 3/16" Diam, 19/64" LOC, 3 Flute Solid Carbide Ball End Mill AlTiN Finish, Single End, 1-1/2" OAL, 1/4" Shank Diam, Spiral Flute
Manufacturer Part #: 4169834
S/N: 58454554
UNSPSC: 27112803
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Mill Diameter (Inch) | 3/16 |
| Mill Diameter (Decimal Inch) | 0.1875 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 19/64 |
| Coating/Finish | AlTiN |
| Overall Length (Inch) | 1-1/2 |
| Shank Diameter (Inch) | 1/4 |
| Extended Reach | No |
| Variable Helix | No |
| Variable Index | Yes |
| Helix Angle | 38 |
| Overall Length (Decimal Inch) | 1.5000 |
| Chipbreaker | No |
| Undercutting | No |
| Length Of Cut Range (Decimal Inch) | 0.2000 - 0.4000 |
| Length Type | Stub |
| Helix Style | Medium |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.2500 |
| Nose Radius (Decimal Inch) | 0.0938 |
| Neck Length (Decimal Inch) | 0.0000 |
| Reach Length (Decimal Inch) | 0.2969 |
| Mill Diameter Tolerance | +0.0000/-0.0020 in |
| Shank Diameter Tolerance | +0.00000/-0.00031 in |
| Maximum Helix Angle | 38 |
| Minimum Helix Angle | 38 |
| Primary Workpiece Material | Steel, Stainless Steel, Cast Iron, Superalloys & Titanium, Hard Material |
| Primary Workpiece Material Code | P, M, K, S, H |
| Material Grade | Fine Grain |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Series | GOmill UEBD |
| Flute Type | Spiral |
| UNSPSC Code | 27112803 |
| Additional Information | Economic Solid Carbide End Mill with Short Style Shanks, Saving Expensive Carbide. Not Recommended for Reconditioning. Extremely Stable Cutting Conditions Due to Short Design. Center Cutting for Plunging & Ramping Operations. Unequal Flute Spacing for Cha |
| Centercutting | Yes |
| Coating Classification | PVD |
| Single Or Double End | Single |
| Shank Type | Straight-Cylindrical |
| Pitch | Variable |
| Coolant Through | No |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.2969 |
| Manufacturers Catalog Number | UEBD0188J3A |
| System Of Measurement | Fractional Inch |
For more info, visit www.p65warnings.ca.gov.
