Kennametal SNMG433MR KCM25B Carbide Turning Insert TiOCN Finish, Neutral, 12.7mm Long, 1/2" Inscribed Circle, 3/64" Corner Radius, 90° Square, Series KENLOC 5699583 - 61285730
Brand: Kennametal- SKU:
- 61285730
- ID:
- 672283
$27.81
Kennametal SNMG433MR KCM25B Carbide Turning Insert TiOCN Finish, Neutral, 12.7mm Long, 1/2" Inscribed Circle, 3/64" Corner Radius, 90° Square, Series KENLOC
Manufacturer Part #: 5699583
S/N: 61285730
UNSPSC: 23242105
(Minimum Order Quantity=10)
(Please order in multiples of 10)
Specifications:
| Relief Angle | 0 |
| Insert Style | SNMG |
| Corner Radius (Inch) | 3/64 |
| Corner Radius (Decimal Inch) | 0.0469 |
| Included Angle | 90degree |
| Manufacturer Grade | KCM25B |
| Coating/Finish | TiCN, Al2O3, TiOCN |
| Wiper Edge | No |
| Insert Hand | Neutral |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness (Decimal Inch) | 0.1875 |
| Series | KENLOC |
| Inscribed Circle (Inch) | 1/2 |
| Inscribed Circle (Decimal Inch) | 0.5000 |
| Insert Material | Carbide |
| Insert Shape | Square |
| Number Of Cutting Edges | 8 |
| Insert Shape Code | S |
| Hole Diameter (Decimal Inch) | 0.2031 |
| Hole Diameter (Mm) ( - 0 Decimals) | 5.16 |
| Maximum Depth of Cut (Decimal Inch) | 0.1665 |
| Insert Holding Method | Clamp, Pin |
| Width (Inch) | 1/2in |
| Clearance Code | N |
| Tolerance Code | M |
| Coating Process | MTCVD |
| Length Range (Decimal Inch) | 0.5000 - 0.6000 |
| Rake | Negative |
| Insert Length (mm) | 12.70 |
| Insert Length (Decimal Inch) | 0.5000 |
| Insert Length (Inch) | 1/2 |
| Primary Workpiece Material | Steel, Stainless Steel, Superalloys & Titanium |
| Primary Workpiece Material Code | P, M, S |
| Iso Code | SNMG120412MR |
| Standards | ANSI, ISO |
| Manufacturers Catalog Number | 5699583 |
| Material Grade | C1, C2 |
| Proprietary Coating Designation | Multilayer Coating |
| Coating Classification | CVD |
| Chip Breaker | MR |
| Rake Angle | 20 |
| Cutting Edge Style | Honed |
| Industry Standard Number | SNMG433MR |
| Width (Decimal Inch - 4 Decimals) | 0.5000in |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | Turning, Facing, Boring |
| UNSPSC Code | 23242105 |
| Insert Size Code | 433 |
For more info, visit www.p65warnings.ca.gov.
