KYOCERA SGS 1/4" Diam 4 Flute Solid Carbide 0.015 to 0.020" Corner Radius End Mill AlTiN Finish, 2-1/2" OAL, 1/2" LOC, 1/4" Shank Diam, Variable° Helix, RH Cut, RH Flute, Centercutting 36570 - 70569587
Brand: KYOCERA SGS- SKU:
- 70569587
- ID:
- 618151
$48.48
KYOCERA SGS 1/4" Diam 4 Flute Solid Carbide 0.015 to 0.020" Corner Radius End Mill AlTiN Finish, 2-1/2" OAL, 1/2" LOC, 1/4" Shank Diam, Variable° Helix, RH Cut, RH Flute, Centercutting
Manufacturer Part #: 36570
S/N: 70569587
UNSPSC: 27112803
UPC: 691781365701
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Mill Diameter (Inch) | 1/4 |
| Mill Diameter (Decimal Inch) | 0.2500 |
| Number Of Flutes | 4 |
| Length of Cut (Inch) | 1/2 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | AlTiN |
| Overall Length (Inch) | 2-1/2 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0200 |
| Variable Index | Yes |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Pitch | Normal |
| Overall Length (Decimal Inch) | 2.5 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.5000 |
| Length Type | Short |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.2500 |
| Shank Diameter (Inch) | 1/4 |
| Corner Radius Tolerance | +0.00000 to -0.00200 in |
| Mill Diameter Tolerance | -0.0012/0.0000 in |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Steel, Stainless Steel, Cast Iron, Superalloys & Titanium |
| Primary Workpiece Material Code | P, M, K, S |
| UNSPSC Code | 27112803 |
| Secondary Workpiece Material | Hard Material |
| Secondary Workpiece Material Code | H |
| Material Grade | Micrograin |
| Series | ZH1C |
| Material Application | Steel, Stainless Steel, Cast Iron, Superalloys & Titanium, Hard Material |
| Proprietary Coating Designation | Ti-NAMITE-A |
| For Use With. | End Mill Toolholders |
For more info, visit www.p65warnings.ca.gov.
