KYOCERA SGS #26 150° Solid Carbide Jobber Drill Bright Finish, Right Hand Cut, Spiral Flute, Straight Shank, 2-1/2" OAL, Standard Point 53026 - 96427745
Brand: KYOCERA SGS- SKU:
- 96427745
- ID:
- 727861
$56.60
KYOCERA SGS #26 150° Solid Carbide Jobber Drill Bright Finish, Right Hand Cut, Spiral Flute, Straight Shank, 2-1/2" OAL, Standard Point
Manufacturer Part #: 53026
S/N: 96427745
UNSPSC: 23241634
UPC: 691781530260
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Drill Bit Size (Wire) | #26 |
| Drill Bit Size (mm) | 3.73 |
| Drill Bit Size (Decimal Inch) | 0.147 |
| Drill Bit Material | Solid Carbide |
| Drill Point Angle (Degrees) | 150 |
| Coating/Finish | Uncoated |
| Flute Type | Spiral |
| Cutting Direction | Right Hand |
| Point Type | Standard |
| Primary Workpiece Material | Cast Iron, Hardened Steel, Non-Ferrous Metal, Steel |
| Coolant Through | No |
| Number of Flutes | 3 |
| Drill Bit Finish/Coating | Bright/Uncoated |
| Flute Length (Inch) | 1-3/8 |
| Shank Diameter (Decimal Inch) | 0.1470 |
| Overall Length (Inch) | 2-1/2 |
| Overall Length (Decimal Inch) | 2.5000 |
| Spiral Type | Regular |
| Flute Length (Decimal Inch) | 1.3750 |
| Series | 103 |
| Flute By Diameter Ratio | 5xD |
| Maximum Drilling Depth (Decimal Inch) | 1.1094 |
| Maximum Drilling Depth (Inch) | 1-7/64 |
| Shank Length (Decimal Inch) | 1.1250 |
| Shank Length (Inch) | 1-1/8 |
| Drill Bit Diameter Tolerance | +0.0000 to -0.0005 in |
| Web Thinning | Web-Thinned |
| Web Configuration | Tapered |
| Shank Type | Straight-Cylindrical |
| Standards | DIN 6539 |
| Drill Bit Grade | General Purpose |
| Drill Bit Size Range (Decimal Inch) | 0.1000 - 0.1500 |
| Material Grade | Micrograin |
| UNSPSC Code | 23241634 |
For more info, visit www.p65warnings.ca.gov.
