Accupro 4-Flute High Performance AlTiN Coated Fine Tooth Roughing End Mill, 1/4" Size, 3/8" LOC, 2" OAL - 37-259-9
Brand: Accupro- SKU:
- 37-259-9
- ID:
- 346129
| Mill Dia | 1/4" |
| Shank Dia | 1/4" |
| Length of Cut | 3/8" |
| Overall Length | 2" |
| Coating | AlTiN |
$61.59
Accupro 4-Flute High Performance AlTiN Coated Fine Tooth Roughing End Mill, 1/4" Size, 3/8" LOC, 2" OAL
Solid Micrograin Carbide
30° Helix
- For steels, stainless steels, titanium & high temperature alloys.
- Reduces vibration and chatter
Surface Treatments:
AlTiN (Aluminum Titanium Nitride)
- Recommended for difficult to machine materials
- Used for aggressive machining of aircraft/aerospace materials, stainless steels, high alloy carbon steels, nickel based high-temperature alloys and titanium alloys. Also used in dry machining of cast irons, nodular iron and selected carbon steel.
- Extremely hard, wear resistant
- Provides increase of 75 to 100% in machining speeds vs uncoated tools
Specifications:
| Mill Diameter (Inch) | 1/4 |
| Mill Diameter (Decimal Inch) | 0.2500 |
| Number of Flutes | 4 |
| Pitch | Fine |
| Length of Cut (Inch) | 3/8 |
| Length of Cut (Decimal Inch) | 0.3750 |
| Shank Diameter (Inch) | 1/4 |
| End Type | Square End |
| Material | Solid Carbide |
| Finish/Coating | AlTiN |
| Overall Length (Inch) | 2 |
| Centercutting | Center Cutting |
| Extended Reach | No |
| Material Grade | Micrograin |
| Single or Double End | Single |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Length Type | Stub |
| Helix Angle | 30.00 |
| Mill Diameter Tolerance (Decimal Inch) | +0.000/-0.005 |
| Shank Diameter Tolerance (Decimal Inch) | +0.0001/-0.0004 |
See all Accupro 4-Flute High Performance TiCN & AlTiN Coated Fine Tooth Roughing End Mills
For more info, visit www.p65warnings.ca.gov.
