Cuttermaster Professional Tool Grinding Accessories

Universal Tower - CM-UT

• Features DC Variable Speed Motor and control on a dual-wheeled infinitely positionable motor tower. It is designed for the CUTTERMASTER Professional Tool Maker but can be used on any tool grinder.

Universal Single Tower - JXT

• Features DC Variable Speed Motor and control on a single-wheeled infinitely positionable motor tower. It is designed for the CUTTERMASTER Professional Journeyman but can be used on any CUTTERMASTER style grinder.

DC Variable Speed Motor and Control
CM-DC

• Upgrade your old CUTTERMASTER to a CM-01DC with our DC Variable Speed Motor and Control
• This is a bolt on motor replacement for existing CUTTERMASTER end mill sharpeners, Replacing the motor with a Variable speed reversing DC Motor

Motorized Insert - CM-02R-RADIAL

• This is an add on item for the CM02R Radius Air Bearing. The DC Mororized bushed spindle converts the air bearing to a non-oiled bush with a driven rotation for grinding spherical ends on anything that fits in a 5C collet. DC 24 Volt variable speed and will fit on any Cuttermaster Style machine.
• The CM02R Radial is a 5C Radius Attachment with a motor to drive the spindle radially. This has been designed for grinding shperical ends on round up to 1" tools. This product has been designed to fit into the existing 1.875" diameter Air Bearing of the CM02R.

Radius Air Spindle - CM-02R

• Grind flutes, square ends, bull nose or ball nose corner radius, as well as other features such as tapers, reamers slitting saw teeth. The Patented Radius Air has a unique Air spindle Bushing which can be replaced if needed after years of service (unlike the CUTTERMASTER). The Toycen CM-02R Radius Air Spindle was designed for the CUTTERMASTER Professional CM-01P and is compatible as a retrofit with other CUTTERMASTER type grinders such as the JX, CM-01 or any grinder with t-slot table. The CM-02R combines a high accuracy air spindle with the capabilities of the CM-03 Radius Attachment reducing set up times.

Air Spindle - CM-02

• The CM-02 Air Spindle for CUTTERMASTER and CUTTERMASTER type machines including stylus, indexing collar and front ring. This is the standard air bearing for helical grinds, like the outside diameter of an end mill or router bit. It can be used for many other operations as well.
• The jet-stream air bearing is precision-honed and capable of grinding to precision tolerances. The sleeve is stainless steel, the spindle triple-dipped hardened chrome steel. The air-bearing fixture sits on top of a 360 degree swivel base for tapered and chamfered end mill grinding. For use on CUTTERMASTER tool sharpeners and other tool and cutter grinders. Universal stylus, 5C collet draw bar, and 12 index collar included. Keep clean dry air to the air bearing and remember to wipe it down with acetone periodically for long life.

Toycen Air Bearing Upgrade - CM-02AU

• Toycen Air Bearing Upgrade - housing/tube assy. roller burnished
• Recommended fix for old air bearings with plugged air channel, this kit includes and replaces the upper housing, air nipple and tube.

Radius Attachment - CM-03C

• For sharpening the corner radius of bull and ball nose end mills. The fixture sits on top of a 360 swivel base with a 90 stop. The CM-03C has a true lead screw in-feed and cross-feed for generating any radius. Use on CUTTERMASTER grinders and other tool grinders. Includes center finder, index collar and 5C collet draw bar.

Motorized Collet Chuck - CM-ER32

• Designed for production use grinding of cylinders such as carbide and HSS end mill neck reductions and tool cut off. It features an ER32 collet chuck driven by a timing belt and small 24V DC motor, and collet chucks selected for accuracy. Bolt to any table with T-slot. Taper run out less than .0005" x or y direction. Plug in to 110V(220) or battery powered. Includes 10pc ER32 collet set (1/8" - 7/8"). Rated for all-day use.

Shank Flat and Cut Off Fixture - JX-SFC

• The CUTTERMASTER was not designed with set screw flats or neck reductions so we created this fixture to make these operations possible. The z-axis adjustment allows the tool to be held below the wheel so that truly flat, Weldon set screw flats can be achieved. Use this fixture for necks and cut off as well as to avoid wearing out your air spindle.

Large Drill Holding Fixture - CM-06B

• This fixture is designed to bolt onto all CUTTERMASTER type machines or other tool grinders. For sharpening all large drills and core drills, it features angle adjustment from 180 to 100 degrees

Work Holding Fixture - CM-11

• Features four positioning quadrants for any compound angle. Ideal for form tools, lathe bits, spade drills or tools requiring a certain hold or position. For use on any CUTTERMASTER or other tool grinder.

Axis Extension Kit - JX-XAE

• Increases the maximum flute length of your tool grinder. By mounting the stylus to the motor, and extending the x-axis way, long flute lengths are achievable. This kit includes the JX-Riser and requires the Journeyman motor (or JX-upgrade), which unlike the original CUTTERMASTER motor, can pivot.

Motor Riser for Fluting and End Gash Operations - CM-RISER

• Motor Riser for fluting and end gash operations. The traditional 1970s CUTTERMASTER (MG, FCG) doesn’t have the height for end gash and getting inside flutes of hoggers. The Motor Riser sits under the motor and gives lots of height options.

Drill Grinding Attachment - CM-06

• Sharpens drills from 3 to 22mm (1/8" to 7/8"). Through hole allows for sharpening of any drill length.

Drill and Countersink Grinding Attachment and Cam Set - CM-06DCS

• This is our standard CM-06 Drill Point Grinder with an additional cam set to turn it in to a great countersink sharpener. Grind zero, single, two, three and four flute countersinks.

Cabinet Base, 24"D x 24"W x 34"H
CM-10S

• Our recommended cabinet base for Cuttermaster style grinders, it is 24" deep x 24" wide x 34" high. Includes lock and key.
• This is an all Steel cabinet, Made in the USA, very stable and helps keep all of your tools and accessories in one place.

1" and 2" Shaft Extensions
CM-SE-1 / CM-SE-2

• Shaft Extensions are used for increasing the reach of your grinding wheel for operations like gumming inside flutes.

7pc. 5C Collet Set, 1/4" - 1" - CM-5CS-7

• Seven-piece economy collet set: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"
• 5C Collets are included standard with all of our traditional tool grinders. This is the kit they come with, sizes 1/4" to 1".
• Also available in metric (6pc) CM-5CMS-6

ER32 Collet Sets - Imperial and Metric Sizes

• ER32BI - Basic Imperial (6pc.) 1/8" - 3/4"
• ER32AI - Advanced Imperial Reamer and Tap shank (10pc) 1/8" - 3/4"
• ER32BM - Basic Metric (9pc) 2mm - 20mm
• ER32AM - Advanced Metric (19pc) 2mm - 20mm

5C End Mill Holders

• Increase the 1" capacity of the 5C collet set. Used to hold larger cutting tools. Works in conjunction with air bearing fixture. Holds tools with larger shanks. Works in place of 5C collet. For use on CUTTERMASTER machines and 5C collet applications.

• CM-5CE-114 - 1-1/4" diameter
• CM-5CE-112 - 1-1/2" diameter
• CM-5CE-2 - 2" diameter