Everede Carbide Tipped Coolant Fed Port Contour Cutters - Port Standard SAE J1926/MS16142
Brand: Everede Tool- ID:
- 784591
Everede Carbide Tipped Coolant Fed Port Contour Cutters - Port Standard SAE J1926/MS16142
- For drilled or cast holes.
- Port contour cutters are used to produce a proper fit on high-pressure hydraulic fittings.
- Port Tools can be used for both lathe and mill applications.
- Port contour cutter can produce the form and finish internal straight thread O-ring ports in a single operation.
- Reamer-style pilots.
- 12°/15° axial rake.
- All cutters have 3 carbide-tipped flutes.
- The center ground within .0002 inch concentricity.
- SAE & MS standard port contour cutters.
- Well-placed coolant holes provide direct access to the cutting area.
- Made from heat-treated alloy steel with carbide tip inserts.
- Port Standard: SAE J1926/MS16142
- Country of Origin: U.S.A.
| Item | A | B | C | D | E | F | G | H | J |
| No. | +.00"/-.01" | ±.002" | Min. Dia. | ±.008" | Min. Length | ±1º | -.0005" | Length | Length |
| 24-120-300 | 0.272" | 0.36" | 0.669" | 0.083" | 0.472" | 12º | 1/2" | 1-1/2" | 2" |
| 24-120-301 | 0.335" | 0.423" | 0.748" | 0.083" | 0.472" | 12º | 1/2" | 1-1/2" | 2" |
| 24-120-302 | 0.389" | 0.49" | 0.827" | 0.102" | 0.551" | 12º | 1/2" | 1-1/2" | 2" |
| 24-120-303 | 0.452" | 0.553" | 0.906" | 0.102" | 0.551" | 12º | 1/2" | 1-1/2" | 2" |
| 24-120-304 | 0.509" | 0.618" | 0.984" | 0.106" | 0.61" | 12º | 1/2" | 1-1/2" | 2" |
| 24-120-305 | 0.689" | 0.813" | 1.181" | 0.106" | 0.689" | 15º | 3/4" | 1-1/2" | 2" |
| 24-120-306 | 0.806" | 0.945" | 1.339" | 0.106" | 0.787" | 15º | 3/4" | 2" | 2" |
| 24-120-308 | 1.106" | 1.276" | 1.772" | 0.138" | 0.906" | 15º | 3/4" | 2" | 2" |
| 24-120-309 | 1.231" | 1.4" | 1.929" | 0.138" | 0.906" | 15º | 3/4" | 2" | 2" |
| 24-120-310 | 1.544" | 1.715" | 2.283" | 0.138" | 0.906" | 15º | 1" | 2" | 2" |
| 24-120-311 | 1.794" | 1.965" | 2.559" | 0.138" | 0.906" | 15º | 1" | 2" | 2" |
For more info, visit www.p65warnings.ca.gov.
