GMC Heavy Duty 21" x 90", Precision Gap Bed Lathe - GML-2190T
Brand: GMC- SKU:
- GML-2190T
- ID:
- 792478
$37,235.00
GMC Heavy Duty 21" x 90", Precision Gap Bed Lathe - GML-2190T
- Meehanite casting – high performance cast iron
- ISO 9001 certified
- Large spindle bore 3-1/8"
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 12"
- 12 spindle speeds from 40-2,000 rpm
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- One year warranty for parts
- Made in Taiwan
Standard Equipment:
- Free CARMAR DRO installed
- 10" 3-jaw chuck with set reversible jaws direct mount
- 16" Face plate
- 9" steady rest with roller jaws
- 4" follow rest with roller jaws
- 4-way tools post
- Foot brake
- Coolant system
- LED work light
- Removable gap
- 4-way tools post
- Full length rear splash guard
- Dead centers
- Reducing sleeve MT6/MT4 for spindle
- Thread chasing dial
- Tool box and leveling pads
| Max. swing over bed | 20-1/2" |
| Max. length of workpiece | 90" |
| Max. swing over cross slide | 13" |
| Max. swing over gap | 29-1/8" |
| Width of Bed | 12" |
| Effective length in gap to spindle | 6" |
| Effective length in gap to chuck jaws | 3-1/2" |
| Spindle bore | 3-1/8", D1-8 |
| Taper of spindle center | M.T.# 6 w/ reducing sleeve MT6/MT5 |
| Spindle speeds | 40-2,000 rpm / 12 steps |
| Longitudinal feeds | 0.002-0.03 IPR, 35 kinds |
| Cross feeds | 0.0008-0.011 IPR, 35 kinds |
| Inch threads | 4-56 TPI, 36 kinds |
| Metric threads | 0.5-7.0 mm , 32 kinds |
| Module Threads | 0.4-7.0 mm , 17 kinds |
| Diametral pitch threads | 8-120 DP , 32 kinds |
| Max. travel of top slide | 5" |
| Max. travel of cross slide | 11" |
| Spindle length w/o chuck | 17" |
| Leadscrew length X TPI | 1-1/4" x 4TPI |
| Diameter of tailstock quill | 2-3/4" |
| Max. travel of tailstock quill | 5-7/8" |
| Taper of tailstock quill center | M.T. #4 |
| Main Motor | 7-1/2HP, 220V or 440V, 3 phase |
| Amperage draw | 220V/ 35A , 440V/20A |
| Coolant pump motor | 1/8 HP, 220V, or 440V, 3 phase, 2Gal coolant |
| Overall dimensions, LxWxH | 139” x 41” x 59” |
For more info, visit www.p65warnings.ca.gov.
