Iscar 90º Indexable Face Mills for TPKT1003 & TDKT1505 Inserts
- Triangular insert with 3 cutting edges
- Face Milling, Slotting, Shouldering, Ramping, & Helical Milling (Circular Interpolation).
- Series: HELIIQMILL 390
- Economical high positive 90° shoulder
- Ramping down ability
- High axial rake angles
- Very strong and durable cutter
- Sharp clamping angle for higher clamping rigidity
- Coarse and fine pitch cutters
- For roughing and semi-finishing applications
- Coolant holes for each insert
- Right Hand
- Shank Type: WELDON
| Item No. | Arbor Hole Dia. | No. of Inserts | Max. Depth of Cut | Max. Ramp Angle |
| 19-167-839 | 0.500" | 3 | 0.315" | 1.6° |
| 19-167-841 | 0.750" | 4 | 0.315" | 1.2° |
| 19-167-843 | 1" | 6 | 0.315" | 0.9° |
| 19-167-845 | 0.500" | 4 | 0.512" | 2° |
| 19-167-846 | 0.750" | 3 | 0.512" | 1.6° |
| 19-167-849 | 1" | 4 | 0.512" | 1.2° |
| 19-167-852 | 1" | 5 | 0.512" | 0.9° |
| 19-167-855 | 1.5" | 6 | 0.512" | 0.7° |
| 19-167-857 | 1.5' | 7 | 0.512" | 0.5° |
| 19-167-859 | 2" | 10 | 0.512" | 0.4° |
| 19-167-861 | 2" | 11 | 0.512" | 0.3° |
For more details and Specifications on each item, copy the Item Number below into the search bar at the top of the page.
For more info, visit www.p65warnings.ca.gov.