Keller Portable Tramp Oil Separator Model 365 - 365-KP

Brand:   Keller
SKU:
365-KP
ID:
319399
Sump Size 40 - 400 gal
Dimensions 30" x 20"
Oil Separator Tank 10 gal
Prefilter Large Bag
$5,495.00
Current Stock:
Adding to cart… The item has been added

Keller

Keller Portable Tramp Oil Separator Model 365


High flow rate portable tramp oil separators keep coolant clean in multiple sumps


A Keller portable pump/skimmer rapidly sweeps tramp oil, cleans and aerates entire sump

 

Get these benefits:

  • Extended tool life, improved parts finish
  • Smoke and odor eliminated
  • Multiplied coolant life = Much less machine downtime, greatly reduced coolant purchase & disposal costs


With these exclusive Keller features:

  • Patented permanent oil separating (coalescing) element, never needs changing
  • Rugged high flow 1/2” air-operated pump provides rapid tramp oil removal, circulates & aerates entire sump
  • Compact inlet devices can access any sump
  • No electricals – To operate, simply connect 1/4” compressed air line – All required hoses and fittings provided
  • Sets up in minutes – Requires minimal operator attention – Thousands in service


How to select the Keller Separator for your application:

A Keller portable separator can clean a sump in 3 to 4 hours, and then may be moved to another sump and set up in minutes. We recommend that each sump be cleaned once per week. A separator can clean two sumps in a single shift, or 10 sumps per week in a one shift 5 day operation. The machine tool may be operated while the Tramp Oil Separator is operating.


How the Keller Separators Work:

Each separator is supplied with three inlet devices (see below) which can access the surface of any sump through an opening as small as 3” diameter. The self-priming air operated pump pulls the tramp oil/coolant mixture from the surface of the sump via the inlet device, then through a high capacity bag filter, which removes chips from the fluid.


The oil/coolant mixture is then pumped through the patented Keller all-plastic separator elements immersed in a separator tank. The cleaned coolant continuously returns to the sump. The oil layer collected on top of the separator tank can be drained into a waste oil container by opening the oil drain valve occasionally, usually once per day. No other operator attention is required.


Selection and Ordering Information:

Model # 315 # 365 # 457 # 465
Sump Size Ranges (gallons) 40 - 400 40 - 400 60 - 1000 100 - 2000
Capability for Volume of Tramp Oil High High Very High Very High
Capability for Suspended Solids Load Moderate High High High
Dimensions (L x W) 30" x 20" 30" x 20" 38" x 24" 38" x 24"
Size of Oil Separator Tank 10 gal 10 gal 15 gal 25 gal
Type of Prefilter Small Bag Large Bag Large Bag Large Bag
UPS Shipping Weight 80 lbs 115 lbs 140 lbs 150 lbs
Compressed Air Requirements 0.5 SCFM @ 20 to 125 psig (All Models)
Electricals None (All Models)
Sump Inlet Devices Provided #555-05, #555-06, #555-07



Replacement Filter Bags:

Note: 5 Filter Bags supplied standard with each unit


RAP-25 - 25 Micron Filters, Pack of 5 bags for #315
RBP-25 - 25 Micron Filters, Pack of 5 bags for #365, #457, #465

* 25 micron bags supplied unless otherwise specified. Also available: 100, 50 10, 5 and 1 micron



Inlet Devices


An inlet device draws oily coolant from the surface of the sump while avoiding the intake of air, which can interfere with splitting of oil from coolant in the separator tank. One inlet device is used in each sump.

The #555-07 Floating Inlet Device (7” wide x 10” long), the most frequently used inlet device, automatically compensates for any changes in the level of coolant in the sump.

The #555-07 and #555-17 (7” x 7”) may be used in pit-type sumps with liquid levels as much as 10 feet below floor level.

The #555-05 Floating Inlet Device (2” wide x 12” long) is used when only a narrow access space is available; for example, next to a conveyor.

The #555-06 Fixed Inlet Device requires only a 3” diameter hole for access to the sump but must be adjusted manually if the sump level changes significantly.


Since a Keller portable separator is to be rotated among several machines in sequence, it is most convenient to mount an inlet device permanently in each sump. The connection from the inlet device to the separator is a quick garden hose fitting.

See above for listing of inlet devices supplied with each unit



See all Keller Portable Tramp Oil Separators


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Keller Portable Tramp Oil Separator Model 365 - 365-KP

Keller Portable Tramp Oil Separator Model 365 - 365-KP

Keller Portable Tramp Oil Separator Model 365 - 365-KP

$5,495.00